Welcome to the Melbourne Community Daily Discussion Thread.

  • CEOofmyhouse56
    link
    fedilink
    arrow-up
    4
    ·
    11 months ago

    That’s about all you can do. See if you can put another lot of washing cleaner in, put it on the hottest, longest setting possible and then open it and the drawer to air dry.

    • just_kitten
      link
      fedilink
      arrow-up
      5
      ·
      11 months ago

      It’s currently into the second hour of the post-mould-cleaner cleaning at 60C (that’s what the washing cleaner packet recommended). I’ll leave it open tonight and if it’s still gross tomorrow I’ll do the vinegar with more elbow grease, then a second round with the washing cleaner.

      • CEOofmyhouse56
        link
        fedilink
        arrow-up
        4
        ·
        11 months ago

        Nah I’d bump that temperature as high as it goes. My machine can reach 90°c that’s because it has an internal heater so it’s only connected to the cold water. If your friend’s washing machine is connected to both hot and cold and doesn’t have an internal heater then it’ll only reach around 45°c ish or whatever the hot water is set to. Bump it up to Max on the machine. This machine sounds like it’s neglected and they don’t do monthly hygiene washes.

        • just_kitten
          link
          fedilink
          arrow-up
          3
          ·
          11 months ago

          Hm okay it goes up to 90C so I might try that for the next round.

          Tbh I haven’t given my own machine a hygiene wash for several months now despite it being a monthly reminder on my phone, but I’m inspired to go do a scrub and clean when I head back to mine on Saturday. Theirs is a lot dirtier because they do multiple loads a day with a reflux prone baby and very little time to look into such things (though the rest of the house is sparkling).

          • CEOofmyhouse56
            link
            fedilink
            arrow-up
            3
            ·
            edit-2
            11 months ago

            Yeah I get it. Things do get away from you. Hygiene wash is not optional. It’s a must if you want to keep your expensive equipment in tip top shape.

            Also when it’s finished go around the whole inside with a cloth and you’ll find you can get a lot more shit off when it’s still warm and steamy.

            • just_kitten
              link
              fedilink
              arrow-up
              2
              ·
              11 months ago

              For real, it wasn’t as big a deal with top loaders but I realise it’s so much more important with front loaders. Good idea with wiping round using a cloth, I’ll do that pronto with this round.