• NathA
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Not how Melbourne works. As soon as you go over two hours, it bumps you to the all- day fare.

    It’s been nearly 7 years since I was in Melbourne, so this might no longer work - but an un-advertised hack then was: The ticket is valid for two hours starting from the next hour. So, if you buy a ticket at x:59, your ticket is valid for 2 hours, 1 minute. If you buy it at x:01, you get 2 hours, 59 minutes. That’s why I said 2-3 hours. When I was there, they’d priced a 2-zone return journey as being slightly cheaper than a daily fare. The daily cap didn’t exist, yet though - these days, it’d likely be $10 for the day either way.

    If you touch on/off a tram in the CBD, it didn’t cost anything. I often rode my bike to work and took the tram at lunch. The trips would appear on my Myki history, but the fare was $0.

    It wasn’t possible to buy them like that last time I visited (which, as I said, it’s years ago now). You needed to order one with a Perth residential address. I guess it must have been during the initial rollout that they were limiting it. It’s good they’ve fixed that.

    If you buy online, you probably need a Perth address. That may be where you have that impression. So long as you don’t need a concession/student card, you’ve always been able to just walk in and buy one. Also, Perth’s SmartRider rolled out in 2002 - it’s probably the oldest smart ticketing system in Australia. Not only that, I have been using the same actual card all this time: it’s over 20 years old. I was actually a beta tester of the system, and still have the very faded “control group” sticker on my card. I sometimes wonder how many of the control group tickets are still in play.

    Speaking of smart cards for visitors, it’s a lot easier to cash out unused Myki than Opal.

    I’ve never tried to do this in any city. I just presume I’ll be back some day and keep using it.

    But in Sydney you don’t need to do that. In Sydney (like London), you can just tap on/off with a regular credit card and it behaves like a full fare Opal (or Oyster in London).

    Oh neat! You can’t do this in Perth. Did I mention our system is old?

    • cuavas
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      It’s been nearly 7 years since I was in Melbourne, so this might no longer work - but an un-advertised hack then was: The ticket is valid for two hours starting from the next hour. So, if you buy a ticket at x:59, your ticket is valid for 2 hours, 1 minute. If you buy it at x:01, you get 2 hours, 59 minutes. That’s why I said 2-3 hours.

      That was a holdover from the previous paper ticketing system (MetCard) – it would always give you an expiry time on the hour, so a nominal two-hour ticket would last at least two hours. Myki behaved the same way at first, but they changed it a couple of years ago to always give you exactly two hours, so you can’t use that trick any more.

      That’s why I said 2-3 hours. When I was there, they’d priced a 2-zone return journey as being slightly cheaper than a daily fare. The daily cap didn’t exist, yet though - these days, it’d likely be $10 for the day either way.

      The discounted return trip for a two-zone journey only applied if it was after 9AM. That was another holdover from the paper MetCard system. I believe it was phased out at some point, perhaps when they reduced the price of longer journeys.

      The price for a day being the same as two 2-hour trips when you had a multi-trip ticket already existed with the paper MetCard system. There were three multi-trip tickets that were sold for the same price:

      • 10×2 hour
      • 5×Daily
      • Weekly

      The weekly ticket was pretty simple to understand. It was valid for seven logical days, starting on the day that you first validated it (a logical day ended at about 2AM, not midnight – the few services after midnight before transport stopped for the night counted as the previous day). The 5×Daily was pretty simple as well – you could use it all day on five logical days, but they didn’t need to be contiguous. If you travelled most days, including at least one day on the weekend, a weekly would be cheaper. But if you travelled no more than five days per week and sometimes travelled four days or less, the 5×Daily was cheaper, because you could carry over your unused days to the next week.

      The 10×2 hour was more complicated. The first time you used it in a logical day, you’d use up one “ride” which would last no less than two hours (i.e. up to 2:59 if you validated right after the hour). The second time you used it in the same logical day, it would use up one more ride which would last until the end of the logical day. So you’d never use more than two of your “rides” in a single logical day, no matter how much you travelled. This meant that there was really no reason to buy a 5×Daily ticket – the 10×2 hour ticket got you the same number of logical days of travel for the same price, with some added flexibility if you occasionally only used a couple of hours worth of public transport.

      They never advertised that the 10×2 hour ticket had this feature of upgrading you to daily on your second ride. I think it didn’t have that feature originally, but they rolled it out with no announcement and kept it until the paper ticketing system was retired.

      I was actually a beta tester of the system, and still have the very faded “control group” sticker on my card. I sometimes wonder how many of the control group tickets are still in play.

      Interesting that it still works after that long. Myki cards expire after a few years (originally three years, but I think they’ve introduced ways to it to at least five years if you continue to use the card). When introduced, Opal cards expired after nine years (I don’t know if they’ve changed this). Hong Kong Octopus cards also expire after a few years. In all three of those systems, you can get the value transferred to another card if your card has expired or will expire soon.