Seagoon_ to Melbourne · 6 months agoDaily discussion thread: 🌭 Saturday, May 18, 2024message-squaremessage-square146fedilinkarrow-up112arrow-down10
arrow-up112arrow-down1message-squareDaily discussion thread: 🌭 Saturday, May 18, 2024Seagoon_ to Melbourne · 6 months agomessage-square146fedilink
minus-squareSituationCakelinkfedilinkarrow-up1·edit-26 months agoWhat do you mean by grip? If it’s not pulling out then it’s probably a screw in fitting. Turn anticlockwise to remove.
minus-squarePilklinkfedilinkarrow-up1·edit-26 months agoThe bulb mounts flush to the housing, there is nowhere to grip in order to turn the bulb, even from the inside of the rangehood. But I was able to get it swapped over with a small suction cup in the end.
What do you mean by grip? If it’s not pulling out then it’s probably a screw in fitting. Turn anticlockwise to remove.
The bulb mounts flush to the housing, there is nowhere to grip in order to turn the bulb, even from the inside of the rangehood. But I was able to get it swapped over with a small suction cup in the end.
Win!