• teawrecks@sopuli.xyz
      link
      fedilink
      arrow-up
      24
      ·
      21 days ago

      Or just the form of a crab in general! Carcinisation is so weird, but apparently evolution sometimes goes “Let’s just do crab again, that shit was 👌”.

      • Dasus@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        19 days ago

        I genuinely fail to see why it’s a thing. Like reading up it, it’s basically just convergent evolution of crustaceans to a crab-like shape.

        Couldn’t the same be said for a ton of fish-like animals? The many attempts of nature to develop a fish? Hell, even some mammals went back to the fish, plan, although with the tail-fin the wrong way and having to visit the surface to breathe.

        Or large-ish mammals all having pretty much a similar bodyplan, four limbs, head and neck.

        Like surely there’s something so specific in carcinisation that I just haven’t picked up on yet. If someone know what it is pls inform me.

        • teawrecks@sopuli.xyz
          link
          fedilink
          arrow-up
          1
          ·
          19 days ago

          I’m not an expert, but my understanding is that the science indicates all mammals have a common ancestor. Not certain about fish, but I think that’s a similar case?

          To me, the surprising part about carcinisation is that, the form of a crab seems oddly specific, but non-obvious. I mean, I look at the form of a fish and think, “yeah, it makes sense why that shape would be favored in water,” but I look at a crab and think “guess that’s just what worked out for your ancestors. Tough luck, buddy.” But apparently it’s not just bad luck, it’s a common strategy.

          • Dasus@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            19 days ago

            Not certain about fish, but I think that’s a similar case?

            Did you know humans are more closely related to catfish than catfish are to dogfish?

            QI | No such thing as a fish

            ¦“yeah, it makes sense why that shape would be favored in water,”

            Yeah, I can see that. But also it’s swimming in water. Then again if tou want to crawl around the bottom? Hexapod is probably the way to go. But then you also need to be able ro manipulate shit, so frontlimbs become bigger.

            Like a lot of space vehicles meant for surface exploring, both imagined and real, are usually six-wheeled, probably for added stability in a rocky terrain where there’s a bit less gravity and sometimes storms and whanot. And what is it like on the ocean floor? Rocky, basically “less gravity” and odd flows like storms.

            Idk there’s a bit more to it I guess, I’m just looking for what that bit is, or if there indeed is one.

            • teawrecks@sopuli.xyz
              link
              fedilink
              arrow-up
              2
              ·
              edit-2
              18 days ago

              Yeah, that QI clip came to mind when you mentioned it, but to your point the shape that we consider “fish-like” shows up a lot in water. Even whales and dolphins figured out a similar shape, despite them not being fish (though they might still be etymologically related if you go back far enough?)

              Ok, I can buy that the shape of a crab is probably optimized for a certain lifestyle.

  • _bcron_@lemmy.world
    link
    fedilink
    English
    arrow-up
    56
    arrow-down
    12
    ·
    21 days ago

    Windows Control Panel. Everything’s there, multiple ways to sort it all, no need to go shake things up

    • Hawke@lemmy.world
      link
      fedilink
      arrow-up
      67
      arrow-down
      1
      ·
      edit-2
      21 days ago

      Ah yes. Perfection:

      Or maybe:

      No? maybe this.

      Edit I missed windows XP

      No shakeups at all, it’s like a rock.

      Perfectly reliable and unchanged from the beginning.

      Edit since folks choose to distinguish “Settings” from “Control Panel” as if that doesn’t make the point even stronger. I’ll admit that it’s been pretty consistent since Windows 7. Still very different than the first time around.

      • _bcron_@lemmy.world
        link
        fedilink
        English
        arrow-up
        18
        arrow-down
        1
        ·
        edit-2
        21 days ago

        Well, the last 2 images you linked are Settings and not Control Panel, from versions that decided to not only have that but also the Control Panel, and Control Panel is thematically the same across all versions

        • Hawke@lemmy.world
          link
          fedilink
          arrow-up
          4
          arrow-down
          3
          ·
          21 days ago

          That makes it worse! Clearly they did not get it right the first time around, or there wouldn’t be any reason to tweak and replace it all constantly.

      • Brkdncr@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        21 days ago

        Control panel is that drawer of tools, tape, rubber bands, and glue that’s near the kitchen

    • QuarterSwede@lemmy.world
      link
      fedilink
      arrow-up
      22
      arrow-down
      2
      ·
      21 days ago

      Oh hell no. You don’t remember it coming out and everyone complaining about how convoluted it was. Pepperidge farm remembers.

      • Blue_Morpho@lemmy.world
        link
        fedilink
        arrow-up
        4
        arrow-down
        1
        ·
        21 days ago

        People complained that a few things were hard to find, but not that the control panel itself was convoluted.

  • shalafi@lemmy.world
    link
    fedilink
    English
    arrow-up
    34
    ·
    20 days ago

    Alien. Maybe my only 10 out of 10 movie, and not my favorite!

    We’ve all seen it so many times it loses it’s luster. Wife had never seen it so I sat with her in the dark and watched it for the first time in decades. Jesus. She was about to tear through the couch cushion in stress. I knew what was going to happen and couldn’t peel my eyes off the TV.

  • weew@lemmy.ca
    link
    fedilink
    arrow-up
    31
    ·
    20 days ago

    Instant Pot.

    Apparently they went bankrupt because they built their units too well. Everyone bought one and never needed to buy a replacement.

  • latenightnoir@lemmy.world
    link
    fedilink
    arrow-up
    31
    arrow-down
    2
    ·
    21 days ago

    If I remember correctly, one such example is the lightbulb. Some of the earliest designs were centered around using longer-lasting filaments than their contemporary counterparts, which meant considerably increased lifespan.

    • QuarterSwede@lemmy.world
      link
      fedilink
      arrow-up
      18
      ·
      21 days ago

      They still made them too. 130V bulbs / garage bulbs / heavy duty bulbs all lasted far longer on 120V because the filament was thicker. They basically never went out.

    • EndlessNightmare@reddthat.com
      link
      fedilink
      arrow-up
      14
      ·
      20 days ago

      There is a trade-off between efficiency and durability on incandescent light bulbs. They did sell bulbs that lasted longer, but those had lower lumen/watt.

      For generic bulbs, the cost of electricity was significantly greater than the cost of the bulb. It was cheaper to replace bulbs more frequently than to waste electricity.

    • hperrin@lemmy.world
      link
      fedilink
      arrow-up
      11
      ·
      21 days ago

      Sure, but those kinds of lights are very dim. You can just use a dimmer bulb set to very low if you want that kind of longevity.

      • pearsaltchocolatebar@discuss.online
        link
        fedilink
        arrow-up
        26
        ·
        21 days ago

        That’s only because that light has been running non-stop, and at very low power. It’s the on/off cycles that kills the filament.

        Plus, the whole “they used to make stuff to last” thing is just survivorship bias. They absolutely made garbage products in the past, but those didn’t survive.

        Plus, most things like appliances were major purchases. People today don’t want to/can’t drop the equivalent of $400 on a toaster or $3k on a washing machine.

        • over_clox@lemmy.world
          link
          fedilink
          arrow-up
          10
          arrow-down
          1
          ·
          21 days ago

          Ah, but that’s just it, lightbulbs were the beginning of enshittification. Once lightbulb manufacturers realized people weren’t coming back to buy more bulbs very often, they started deliberately making them to burn out a bit faster, to make them more of a consumable product.

          Do note, there’s a difference between a conspiracy theory and an actual conspiracy. This actually happened yo, and we’re still suffering with this sort of deliberately short lived shit today…

          https://youtu.be/ulUI7JsFjZU

          • TwentySeven@lemmy.world
            link
            fedilink
            arrow-up
            7
            ·
            21 days ago

            With light bulbs, there is a trade off between longevity and efficiency.

            Efficient shorter lasting bulbs are the superior product, they save the consumer money (at the expense of the inconvenience of having to replace them a little more often)

            • over_clox@lemmy.world
              link
              fedilink
              arrow-up
              9
              ·
              21 days ago

              Meanwhile, after they mastered the process of making LEDs, they were quoted to have a half life of around 400 years, meaning that after 400 years continuous use, they’d be expected to emit about half as much light as they did new.

              Now what did they go and do? They ramped up the power and made them blindingly bright, yet only last like 5 years or so, if you’re lucky.

              And the cycle of enshittification continues…

              • shalafi@lemmy.world
                link
                fedilink
                English
                arrow-up
                4
                ·
                20 days ago

                Producing quality LEDs is a hella process. Producing shit LEDs is cheap.

                There are several layers (7?) and a crack of a micron or three will suck the life out of it. Add to that shitty controllers and we get shitty LEDs. But they’re cheap!

                I’ve got a couple of red LEDs that were made for the original IBM PC. They still work flawlessly.

        • Broken@lemmy.ml
          link
          fedilink
          arrow-up
          5
          ·
          20 days ago

          I agree that there is survivorship bias, but I disagree that its “just” that.

          Things are made cheaper today, regardless. There are $400 toasters, but I guarantee that one wouldn’t last as long as a 1950s toaster.

          Plumbing fixtures are a better example, as essentially you can’t find one that is equivalent of a 50 year old faucet, no matter the price. They just don’t make them like that.

          Electronic components are another factor. First off, we stopped using lead in solder which results in weaker, more brittle connections. They just don’t last as long. True, we have advancements that make components run hotter in certain scenarios (so those connections get more stress) but even disregarding that the fact still stands it’s not as good.

          Then we added those electronics into everything to make them “better”. Old washing machines were essentially all mechanical so they would run forever, and be easy to maintain or fix. Now they have computers running them that are designed to not be fixed.

          Its hard to find a company today that wants to make a good product. They just want to make one that is good enough. Our culture has shifted to that mindset. Things don’t last as long, so we switched to a disposable mindset.

        • tetris11@lemmy.ml
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          19 days ago

          The one above is my favorite “There are No Flowers in the Real World” by David Lapham (of The Darkness and Batman fame). Anything written by him, Troy Nixey, Gregory Ruth and Paul Chadwick are worth reading.

          • “An Asset to the System” by Troy Nixey
          • “Butterfly” by Dave Gibbons
          • “Deja Vu” by Paul Chadwick
          • “A Path Among Stones” by Gregory Ruth
          • “A Sword of a Different Color” by Troy Nixey
          • “The Miller’s Tale” by Paul Chadwick
          • “Wrong Number” by Vince Evans
          • “Broadcast Depth” by Bill Sienkiewicz
          • “Saviors” by Spencer Lamm

          Skip: “I Kant” and “Run Saga Run” and anything by Peter Bagge. Neil Gaiman also wrote a small story called “Goliath” but it’s not something I clicked with.

  • frozenspinach@lemmy.ml
    link
    fedilink
    English
    arrow-up
    16
    arrow-down
    1
    ·
    20 days ago

    Diablo 1 and 2 by Blizzard. I guess maybe the 2nd time around was perfection but between those two, nothin further was needed.

  • awazawazawaz@lemmy.world
    link
    fedilink
    arrow-up
    16
    arrow-down
    2
    ·
    19 days ago

    Jackson’s Lord of the Rings. All three are the absolute pinnacle of every craft represented in them. (i.e.: camera work, costumes, casting, CG, practical effects, soundtrack, and all the rest.)

    • folaht@lemmy.ml
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      edit-2
      19 days ago

      I thought it was a huge disappointment, most of all due to the CG.

      • Everything looks hueless, often with only a few colors, with weird light angles and enemies often shown as a blur. As if it was made to put everyone on the same level as those who are colorblind and visiually impaired.
      • Soundtrack was a dissonance of what went on on screen.
      • The towns and villages were beautifully animated and showed wide shots of them, so one could be sure that they were missing any signs of food production or water sources.
      • The world did not just look dry in color, but also literally dry. Especially the shire which gives it a plastic feel to it.

      All of those put together made me feel it was taking place on a pre-dinosaur earth or not yet fully terraformed planet Mars, rather than a place of fantasy and wonder.

      And Saruman’s death was absent in the theatrical cut. One of the most important parts of the story was simply cut out.

  • over_clox@lemmy.world
    link
    fedilink
    arrow-up
    15
    arrow-down
    3
    ·
    21 days ago

    I fixed a bent iPad 2 using a rubber mallet and a short piece of wood on a good flat wooden bench. Hey, I didn’t feel like busting out the heat gun and all that nonsense for the glued on touchscreen just for a bent metal frame, so I took a chance.

    At worst, the touchscreen might have broke in the process, but that would have only set me back $7 and an extra 45 minutes. But it worked perfectly, flattened out correctly, didn’t break anything, and I got to go to lunch like 45 minutes early.

    I don’t recommend this approach though.

    • Cruxifux@feddit.nl
      link
      fedilink
      arrow-up
      6
      ·
      21 days ago

      Why would a touch screen have only set you back 7 bucks? Is that how much they cost for phone repair shops?

      • over_clox@lemmy.world
        link
        fedilink
        arrow-up
        18
        ·
        21 days ago

        At the time, for the iPad 2, yes. The touchscreen is not sealed to the LCD on the iPad 2, it’s only glued to the edges of the frame with double sided tape.

        Neither part was broke, it was just that the frame was slightly bent by the volume buttons, jamming one of the buttons in. It was such a subtle bend that I really didn’t see any good reason to go through all the trouble of disassembly, as even that risks breaking the touchscreen.

  • tetris11@lemmy.ml
    link
    fedilink
    arrow-up
    12
    ·
    19 days ago

    The first twilight zone. All the followups just lacked the stark yet innocent tone of a someone reasoning with an unjust reality.

    I’ve been making my way through the original recently, one-by-one and though some of them are hit and miss, even the misses are doing something amazing cinematically.

    • jerkface@lemmy.ca
      link
      fedilink
      English
      arrow-up
      8
      ·
      21 days ago

      Was only a few years ago I realized that the minute hand is entirely superfluous for most applications. You can easily tell what ten minute interval of the day you are in by looking only at the hour hand.

      • davidgro@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        edit-2
        21 days ago

        On a large enough clock, the hour hand could have easily visible marks for not just minutes, but also seconds. If I were an architect or whatever I would try to make that the floor of a lobby or something.

    • Che Banana@beehaw.org
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      21 days ago

      My kitchen must have is an analog clock.

      Years of training and using it daily, never wore a watch and don’t give a shit what time it is when I am out of the kitchen.