• Mike@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          7 months ago

          It’s a Carrier 38MARB Performance Heat Pump, and it SAYS it’s rated at 100% efficiency down to 5 deg F but I can tell you from experience that it starts buckling below freezing. I have monitored it over a whole winter season and when we hit the 20s it starts running defrost cycles every 15-20 minutes. Each cycle takes about 5-10 minutes to defrost. It’s not able to keep the room warm.

          Granted, this is a 500 sq ft room with a wide opening to the next room and a 25’ ceiling. I don’t think it was a great use-case for heating in general. For cooling, this thing is irreplaceable. It barely breaks a sweat and uses almost no energy, while keeping the room at any low temperature I set it to. I’ve yet to see it have any issues cooling, even when it’s 90F and humid outside.

          • phoneymouse@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 months ago

            Good info… thanks. It doesn’t look like 38MARB is is a “high heat” model. R stands for Regular Heat. You could look at 38MGHBQ. The H is for High Heat.

            That aside, there seems to be a lot of overhyping the performance of heat pumps lately. I have been interested in one, but am hesitant. Around me there are rebates to replace your furnace with a heat pump, but I don’t like the idea that they become less capable of heating the colder it gets. At least a furnace generates the same amount of heat when it is cold.

            • Mike@lemmy.ml
              link
              fedilink
              English
              arrow-up
              1
              ·
              7 months ago

              That is very good to know about the high heat model. Thank you.