• Mike@lemmy.ml
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    10 months ago

    It’s a Carrier 38MARB Performance Heat Pump, and it SAYS it’s rated at 100% efficiency down to 5 deg F but I can tell you from experience that it starts buckling below freezing. I have monitored it over a whole winter season and when we hit the 20s it starts running defrost cycles every 15-20 minutes. Each cycle takes about 5-10 minutes to defrost. It’s not able to keep the room warm.

    Granted, this is a 500 sq ft room with a wide opening to the next room and a 25’ ceiling. I don’t think it was a great use-case for heating in general. For cooling, this thing is irreplaceable. It barely breaks a sweat and uses almost no energy, while keeping the room at any low temperature I set it to. I’ve yet to see it have any issues cooling, even when it’s 90F and humid outside.

    • phoneymouse@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      10 months ago

      Good info… thanks. It doesn’t look like 38MARB is is a “high heat” model. R stands for Regular Heat. You could look at 38MGHBQ. The H is for High Heat.

      That aside, there seems to be a lot of overhyping the performance of heat pumps lately. I have been interested in one, but am hesitant. Around me there are rebates to replace your furnace with a heat pump, but I don’t like the idea that they become less capable of heating the colder it gets. At least a furnace generates the same amount of heat when it is cold.

      • Mike@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        That is very good to know about the high heat model. Thank you.