Always enjoyed scrolling though these posts, figured I’d give it a go here:
What are your must-have selfhosted services?
Some of mine:
- Adguard Home - Add blocker
- Adguard Home Sync - sync multiple adguard instances
- Bookstack - documentation
- BorgMatic - config driven backup
- Change Detection - monitor websites for changes, prices for example.
- FreshRSS - RSS reader
- Home Assistant - home automation
- KitchenOwl - groceries
- Rclone - sync backups to remote storage
- Traefik - reverse proxy
- Vikunja - todo list
- Wireguard Easy - VPN
You must log in or # to comment.
Didn’t see Paperless in these comments yet. Great way to never again search for documents, bills, receipts, warranties, manuals, etc cetera ad nauseam.
I installed paperless a couple of months ago, and then needed a document from it this week, for the first time. Standing at my front door, with a contractor waiting, I retrieved a contract in about ten seconds.
I will never stop using this software.
Link: Paperless-NG (Github)
Other than the obvious of being selfhosted, how does it compare to google drive for search/recall etc
I find it very useful due to its automatic assignment of various labels, categories and etc.
These assignments mean very little work for me to keep things tidy. Icrn use labels etc for filtering so it is extremely fast to find JUST the documents I want.
Paired with a small, fast duplex document scanner, it’s incredibly convenient. Almost any kind of document I get in, just gets thrown into a scanner, and then into a box - no sorting.
deleted by creator
deleted by creator
Why matrix-synapse? Just curious.
deleted by creator
I’ve looked at Synapse before but disabling the federation and making the accounts private and subject to approval was too much work for me. It was designed to be interconnected with Matrix and it shows.
Are the conferencing features that great to be worth the headache?
E2EE chat.
deleted by creator
Syncthing - No introduction needed. Couldn’t live without it.
Healthchecks.io (you can self host this) - Dead man’s switch monitoring for all my automation. Most of my automated scripts hit up a Healthchecks endpoint when they run, and if they fail to hit the endpoint on a regular schedule I get notified. Mandatory for my anxiety.
I have a network drive that I put all my documents on. Would using syncthing have a better workflow than that?
It depends on what your workflow/usecase for putting documents on the drive currently is. Syncthing is usually intended to be put on two separate devices, and then a folder on each device gets synchronized - meaning you have a folder of your documents on each device. Is there any reason not to just mount the network drive’s folder and drag the documents in that way?
Yeah, that’s how I do it now. I just mount the network drive on each PC and they can all access the same files. I’m just wondering if there’s a usecase that syncthing has that my workflow doesn’t that I just can’t think of because I haven’t used it.
Yeah I wouldn’t bother. It intends for you to have a duplicate copy on every device, which is probably not what you want. Syncthing is really good for things like synchronizing notes, calendars, password databases, music, etc to your devices. Things that you want to access in both places, but that are usually disconnected from each other from time to time.
Oh, got it. That makes sense. Thanks for the info!
After looking at other’s lists I think I am missing a good document server. Emby isn’t the best music and photo server so I could look at improving that, but it has been good enough for those purposes that I haven’t felt like going to the trouble of installing anything else.
- Aster: Multiseat software for Windows allows several users to work on the same PC.
- LaunchBox: Frontend for DOSBox, modern PC games and emulated console platforms.
- Blue Iris: Video security and webcam software
- Calibre: E-Book management and server
- Emby: Server for videos, music, audio books, and photos.
- Firewalla: VPN server, internet monitor and control
- Foundary Virtual Tabletop: Online role-playing game server.
- Grafana: Dashboard interface
- Hubitat: Home automation
- Hyper-V Manager: Tool that allows users to manage Hyper-V hosts and virtual machines (VMs)
- InfluxDB: Real-time database server.
- IotaWatt: Open WiFi electric power monitor
- Microsoft SQL Server: Database Server
- Octoprint: Web interface for 3D printers.
- PCem: Emulator for various old 8086 through Pentium PCs.
- SmartSync Pro: File sync program
- SnapRaid: Backup program for disk arrays.
- Stablebit DrivePool/Scanner: Disk pooling, file duplication, protection, disk surface scanner, and disk health monitoring
- Steam Link: Access and play steam games remotely
Highly recommend ditching emby for jellyfin!!
I bought both Plex and Emby. I started with Plex but had some technical issues related to my machine having multiple IP addresses so I switched to Emby. I tried Jellyfin before switching to Emby but it wasn’t as capable as Plex or Emby (at least at the time) and I wanted something with some commercial support behind it. I have been pretty satisfied with Emby, but do wish it would get requested features added in a much more timely manner.
Thank you for taking the time to link everything and formatting the post
One of my favorites is Whoogle, a simple Google search proxy. It accepts search requests and forwards them to Google anonymously, then strips out the AMP links and tracking. There’s even an option for it to use Tor so your IP address changes frequently.
Whoogle vs SearXng in your experience?
I used both, I ended up settling on searxng because Whoogle seemed to be unable to retain my settings. Might be something with my cookie configuration, but searxng has no problem remembering my preferences. If that is not a problem for you then they are comparable; Whoogle is pretty simple to get going and works well, searxng is slightly more complicated to set up (but not that much with docker) but has a ton more features.
I looked into SearX but didn’t need all the extra features it has
All of the public instances seem to be rate limited and not return any results. Take it you don’t get that issue self-hosting it?
Correct. And it’s such a tiny, simple Docker install you could theoretically run it locally instead of a server.
Does your server have to be accessible from the internet or is it enough that it can go out to make the request? Just asking because I am keeping my setup in our intranet, no access from outside my home.
Yep, it just needs outbound connectivity. I run mine on an intranet like you, with VPN access for when I’m not at home.
Under Proxmox, I have the following running currently:
**As LXC Containers: **
- AdguardHome
- Psono Password Manager
- Zitadel SSO and
- One I’m trying to get Pomerium installed on
As a VM
- Home Assistant
The rest is all docker on the host OS which is Debian 12, this is not my complete list but the most used ones in my world:
- Dozzle (great docker log viewer)
- Uptime Kuma
- Authentik configured to allow passkey login (Simply awesome!)
- IT-Tools - https://it-tools.tech/
- Homepage by Ben Phelps
- WyzeCamBridge (So I can have RTSP for Home Assistant)
- SterlingPDF (MultiTool for PDFS)
- sshwifty - SSH within your browser - your logins are locally stored in your session only. https://github.com/nirui/sshwifty
- Portainer
- Vaultwarden
Protected by Authentik’s SSO
- Portainer
- Statping
- Proxmox
- Wordpress (I’m evaulating this for a suitable Joplin replacement ) In short - I found that it’s easier to reference a site instead of installing Joplin when I rebuild my computer.
- Psono password manager
You may wonder why I am using Zitadel and Authentik, I first started with Zitadel, and moved to Authentik, but am evaluating both. They both have their positives. So far Authentik has been the most useful for me. And about the two password managers, I use Vaultwarden as it supports everything I need including Passkey support. My step daughter who is an adult is disabled so having an easier password like Psono makes it easier for her.
How has your experience been with the wyze cameras? Do you still need to be a wyze subscriber?
I’m not a Wyze subscriber and just use the cams for monitoring. The Wyze Cam Pan 3 so far has been quite amazing with low light full color pics whereas my Pan Cam 2 is just black and white in same low light.
With the bridge, you can pipe the feed it provides to Shinobi or another DVR which reads RTSP, RTMP or HLS feeds and saves them to your storage for full time recording so you don’t need the subscription. You do have to login to your Wyze account for the bridge to work though but that’s fine with me.
Any specific reason you’re running Proxmox? Why not run everything in containers with one VM for HA? Why LXCs?
Can’t speak for OP but I can say that I switched to proxmox from just running docker and services native. Proxmox offers a lot of flexibility, you can do snapshots, build many different LXC containers very easily, to keep things separate or have better control over resource usage. Also I run mine in a 3 node cluster so I can do live migration of VMs and pretty quick migrations of LXC containers. This all allows me to run my services with little to no downtime and have redundancy.
Because, for Home Assistant, I moved it from Raspberry Pi 4 to a KVM and found it faster. I use Proxmox for that which I found to play nicer with it than just setting up a Debian Server and spinning up a KVM via QEMU on a desktop. I’ve been there and had issues over time. As for why LXC’s they are smaller and the only ones I use are from https://tteck.github.io/Proxmox/ which makes them super simple to set up and run!
Immich for photos (the only proper Google photos alternative) Nextcloud for storing documents and photos (read by immich). Jellyfin to replace Plex.
According to my continued survival on the planet, none.
Not all of us are so lucky. I was hospitalized for 3 weeks until I was able to get my PiHole back up. I was nearly a goner.
hahaha
PiHole
Syncthing.
Jellyfin
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters DNS Domain Name Service/System HA Home Assistant automation software ~ High Availability HTTP Hypertext Transfer Protocol, the Web IP Internet Protocol LXC Linux Containers NAS Network-Attached Storage PiHole Network-wide ad-blocker (DNS sinkhole) Plex Brand of media server package SSH Secure Shell for remote terminal access SSO Single Sign-On VPN Virtual Private Network nginx Popular HTTP server
11 acronyms in this thread; the most compressed thread commented on today has 9 acronyms.
[Thread #285 for this sub, first seen 17th Nov 2023, 17:05] [FAQ] [Full list] [Contact] [Source code]
Nextcloud, after setting it up it gives me everything I love about Google and Apple’s cloud services without the privacy invasion or any of the other cons. And I even find it more stable and less buggy. 10/10
Same for me. But there is work involved in the maintenance, there are awkward transitions at times with PHP migrations. But I would not go back to Google. I have tons of storage space without having to pay the associated service fees at the cost of slower speeds.
My whole infrastructure is designed so that my homeserver is expendable.
Therefore my most important tool is Syncthing. It is decentral, which is awesome for uptime and reducing dependance on a single point of failure. My server is configured as the “introducer” node for convenience.
I try to find file-based applications, such as KeePassXC or Obsidian, whenever I can so that I can sync as much as possible with Syncthing.
Therefore there is (luckily) not much left to host and all of it is less critical:
- Nextcloud AIO: calendar, contacts, RSS, Syncthing files via external storage
- Webserver: Firefox search plugins (Why is this necessary, Mozilla?!), custom uBlock Origin filter list, personal website
So the worst thing that can happen when my server fails is: I need to import my OPML to a cloud provider and I loose syncing for some less important stuff and my homepage is not accessible.
Since I just rebuilt my server, I can confirm that I managed a whole week without it just fine. Thank you very much, Syncthing!
PiHole - blocking ads Home Assistant - home automation, smart lighting & more Nginx Proxy Manager - easy reverse proxying Lemmy - here we are, on Lemmy Immich - Google photos replacement Motioneye - for putting video streams into home assistant and getting motion detection WyzeBridge - connecting my Wyze doorbells to Motioneye Doods2 - quick to set up object/person recognition for video and camera streams
