i actually think plumbing is the thing we’d miss most if it suddenly vanished - collecting water and getting rid of human waste would be horrible chores. Also it’s always so nice being able to turn a tap and drink fresh clean water,
The written word. Just think about how much that has completely revolutionized communication all around the world. We can receive firsthand accounts of events from thousands of years in the past, on the other side of the world, from a civilization that hasn’t existed since the Pyramids. We can learn the sagas and myths of countless cultures around the world. There’s a good reason that the very act of writing itself was considered magical for eons. In many ways, it still is.
On dhat note, dhe English language is kwite inkonsistent on letter pronunsiashion. I think it kould do widh a refresher on how letters work or just do a round of simplifikashion on sounds instead of being a Frankenstein fokusing on where the word kame from.
Ah, but see, the beauty of the English language is that 50% of the time we don’t actually care whether something is spelled properly unless it’s formal academic writing or something official. We can make do with whatever, and guesstimate our way through almost anything!
Yeah I read that other person’s comment no problem. Language is cool.
Yeah, it IS cool! Even cooler is learning how language and words has evolved over time. A word you thought you knew might have had completely different meaning a few years or a century ago, and often gives a hint about the culture back then. If I redid my life, I would love to have become a language researcher.
The written word is well and good, but writing and reading didn’t become common among everyone until some figured out how to mass-produce writings. The modern world, easy access to education, and many battles for equality and freedom, they couldn’t have happened without printed books. We can learn about the sagas and myths of countless cultures around the world without being a noble or a monk or a scribe, and without knowing the original language. So… Books. The magic in writing became so much more powerful with books.
Youd still need writing invented first
Currently the Steam Deck. Between having (most of) my whole Steam Library availble, being able to run EGS/GOG via Heroic Launcher and all the emulators available, it’s like having my entire gamining history all in one machine.
Plus in Desktop Mode it’s pretty much a full-on desktop Linux PC as well.
I’ve been considering this or the ROG Ally to replace my aging desktop
Go for a Steam Deck, the community and software openess makes it all worth it and it’ll last longer than the Ally
I love that emulation lets me play small screen games on a big screen (I know the Steam Deck can do both, but the pitch is more ‘big screen games made portable’)
Raspberry Pi.
I love how such a small computer can overpower many of the computers I had for much of my life. And still overpowers moat of the old computers people still has today in my country.
Unfortunately, for a $35 computer, they sure are expensive.
the shortage seems to be over, they’ve increased production and secured chip supply so you should be able to find them at RRP again.
They’re still $93 in Australia, for the Model 4 B 4GB, and still out of stock at most sellers.
People still selling them used for more than $100 on Gumtree and Market place.
ah yeah i see on https://rpilocator.com/?country=AU that only the pi4 is available from an official seller, hopefully that changes for you soon. We’ve got pretty much the whole range available in the UK now and for a couple of years it’s been really difficult to get any of them, one type would come in to stock every few weeks and then sell out instantly
Plus the things you can do with it. I used mine to download stuff, run a plex server, home assistant, pihole. It’s such a great addition to your home network.
> home assistant
MyCroft? At least that’s the only one I know of. I think something like this could benefit me, reminding me of tasks to do and whatnot.
I wanted to set one up after realizing I had a Pi lying around, but that Pi has been in my drawer for quite some time, making it a 1st gen Model B. Good enough for a pihole though, so I did that in the meantime.
Living in Texas, atm my favorite technology is air conditioning!
Consumer 3D printing. I still can’t get over the fact that I’m able to get a device for only a few hundred bucks that lets me manufacture almost any kind of simple widget on-demand in a matter of hours. It feels like I’m living in the future.
I’ve been considering a 3D printer for quite some time. Do you recommend FDM or SLA?
What kind of things do you print? How often do you use it? Does it just collect dust? What kind of hobbies do you have and does a 3D printer support/enhance it?
After having both if you don’t mind mess; SLA
I second SLA. Especially if you just want to print small things that look really good.
I am also looking at either getting an FDM or SLA printer, but I am more wondering about the cost of materials than the print quality (most of my projects are small but do not require much detail - they are mechanisms that do not need to be super precise, just printed well enough that components fit) and I have heard that the resin used for SLA is much more expensive than FDM filament. I was wondering to what extent that price difference is.
If you have a place like a shed or a garage I’d say SLA. I prefer FDM because of the materials just being more hardy then what SLA currently offers. But there’s so little that can go wrong in SLA. As a consumer product it’s so much more repeatible then FDM. But you do need a curing station to wash your prints with isopropyl and running a ultraviolet light on it as well. Also your additude towards cleanliness. If you are the kind of bean that never cleans the toilet or shower give FDM a try, it’s still extremely rewarding and you’ll likely have to learn how the printer works to be extremely good at it. If you have a spick and span bathroom/kitchen/bedroom check out SLA you’ll get an extremely repeatable small prints with hight details like 4k that FDM may never get to.
I went back and forth and have both, but ultimately I’ve ended up enjoying FDM a lot more. It really depends on both what you want to accomplish, and how much you’re willing to spend.
I started off with a cheap Ender 3 V2, used it for a little while, then stopped using it as it was a nightmare having to level it and calibrate it constantly. After that I got an Elegoo Mars 2 Pro as I wanted to be able to make prints without all the mechanical complexity of a FDM printer. It was nice for a while, but I ended up not using it as much because I realized that I enjoyed making functional parts a lot more than art/display pieces like miniatures.
I ended up biting the bullet and getting the best printer I knew of at the time: the Prusa i3 MK3S+. I got the kit version so that I could save some money. While I wouldn’t get another kit, I do think that everyone should get a printer that they need to build from scratch at least once. I learned about every single piece of the machine in detail as I went along, and I now clearly understand what people mean when they use terms like “gantry”, “idler”, “heat break”, etc.
After assembly, the MK3S+ was effortless to use in comparison to the Ender 3. It completely changed my mind in regards to what FDM printers could be. I was even able to get some incredibly detailed sculptures out of it (though, of course, not at the level of a resin printer, but still). This printer has been my main workhorse ever since, and I’ve been using it basically nonstop for all kinds of different projects. It’s even paid for itself with a side business I’ve been running by selling parts to people on FB Marketplace.
Overall, I’d personally advocate for FDM. It is far more versatile than resin in terms of print durability, functionality, cleanliness, and size. It’s even cooler if you get into some light CAD design for making your own parts. Even if you want to make detailed models with it, you can always just swap to a smaller 0.2mm nozzle, print at a lower layer height, and get very detailed prints.
I am into woodworking, custom keyboards, gaming, and a whole host of other hobbies (including 3d printing, haha) FDM is definitely the most useful for my personal hobbies, though I have been interested in Warhammer 40K lately, so maybe a new resin printer is on the horizon for me, who knows.
Ultimately, it’s up to you to decide, but if I had to suggest a good start, I’d go with FDM unless you really want to make minis.
Thank you for the detailed answer! I didn’t realize the art vs. funtional piece aspect that you pointed out in regards to FML/SLA.
Definitely something I need to consider!
Nice post, bestof worthy imho.
I’d stay away from SLA, I’m told uncured resin can be quite toxic.
Quick Google: “Short-term exposure to resin fumes can result in dizziness, headaches, and throat irritation. The long-term risks are unknown due to lack of research, but may include increased risk of cancer.”
Over the last couple years, kubernetes. It completely changed the game and the ecosystem growing up around it is both exciting and refreshing compared with the old way of managing servers.
I’ve been surprised not to see this with any of the fediverse platforms I’ve browsed. Instead, they’re all using Docker Compose. Any idea why that is?
K8s is amazing for big, complicated services. For small things, it quite honestly can be overcomplicated. If you’re running something massive, like, say, Spotify, then k8s will make things simpler (because the alternative for running such a massive and complicated service is… gross lol). That’s not to say that k8s can’t be used for something like Lemmy, just that it might not be worth the complexity.
For the fediverse, I think a lot of the development is written for small, mostly monolithic single servers. K8s is meant for when you have an entire cluster running some service. You wouldn’t typically run a single server with k8s, but rather you’d have many “nodes” and you’d run many instances of your binary (“pods”) across those nodes for the redundancy.
I’m not very familiar with the backends of fediverse servers nor Docker Compose, but I’m under the impression that’s for single servers and I’ve seen many Lemmy instances talk about their hosting as if they only have one physical server. That’s probably fine for a FOSS social media site that is run by hobbyists, but major commercial software would never want to have a single server. Heck, they wouldn’t even want to run just servers in one location. The big cloud providers all offer ways to run k8s clusters that use nodes spread across multiple data centers, usually ones with isolated failure zones, all to maximize uptime. But that’s also expensive. For a big business, downtime means millions of dollars lost, so it’s a no brainer. For Lemmy? As annoying as downtime is, users will live.
k8s have a steep learning curve comparatively. With Docker you just install the Docker package and it’s off to the races. With k8s you need to know basically how Docker works, know how the layers it adds on top work, and define everything using YAML config files to get things up and running. The networking is complicated (but flexible), the storage isn’t straightforward (it’s designed to work with large-scale solutions like S3 or Ceph, so setting it up even for local “folder” storage requires more moving parts). Even bootstrapping a new installation requires many steps to install all the pieces you need.
Don’t get me wrong it’s awesome, but if you don’t already know it, it doesn’t have many advantages for small installations over Docker which is very much “run docker-compose on this file you downloaded and the thing you want sets itself up”.
While there are tools like Helm or Portainer to assist you, you still have to understand it to make it work.
That’s a tough one, but I think I’m going to go with my ebike. That thing has paid for itself several times over by replacing 90% of car trips, and it’s just so much fun! I cut through parks and follow urban trails to work rather than getting stuck in traffic.
I feel that for the rentable e-bikes and e-kick scooters. No need for overcrowded buses or car queues. No need to be afraid my bike is gonna get stolen when i park it. They are everywhere in the city. And is often faster than the bus too.
Just too bad some people cant park them properly, cant follow simple rules, and cant not try to ruin them.
I’d probably go with the Linux kernel. It’s the basis of a fantastical operating system, and used in computing almost everywhere.
Complements on a cool question.
Maybe glassblowing. Inert, airtight containers in any shape you want, made from common minerals. Siphons are also neat, and I didn’t know about them until a surprisingly old age. Ditto for diving bells.
Computers. There is no limit to what they can do. You put a computer to measure time, temperature, the weather; and you can use it to plot all those things in nice graphics. The way you can make computers relate to nature just outline how fundamental it is to science.
End-to-end encryption is my favorite technology.
- Prevents those with power from spying on everyone and ossifying their power
- Protects communications from smaller scale malicious actors
Such an important tech. Hopefully soon we can get quantum-secure cryptographic algorithms in wide use.
I wonder what things are going to be like when previously hoarded encrypted data begins to be decrypted en mass
I think I would say the pocket digital camera, I guess specifically the phone camera. Being able to quickly snap a picture of my kids doing random things over the last 10 years has meant some amazingly beautiful trips down memory lane when I either go looking for a particular photo, or my photo app throws up a curated memory.
I heard this episode of 99pi last week. The more I think about it, the more I like nails.
My man, 99pi is the shit!
Raspberry Pi.
I love how such a small computer can overpower many of the computers I had for much of my life. And still overpowers moat of the old computers people still has today in my country.
