I have a “Dell Inc. Latitude 5290 2-in-1”, and it comes with a stereo microphone array that, by default, has a gain that is way too extreme.

A value of 100% is screeching / over-blasted to any listener, while a value of 25% is most reasonable.

Thus, I wanted to limit the gain of the microphones through PipeWire.

I created the following WirePlumber configuration file.

# For "Dell Inc. Latitude 5290 2-in-1"
# The analog input array is way too loud

monitor.alsa.rules = [
  {
    matches = [
      # This matches the value of the 'node.name' property of the node.
      {
       	node.name = "alsa_input.pci-0000_00_1f.3.analog-stereo"
      }
    ]
    actions = {
      update-props = {
        node.description        = "Dell Latitude 5290 2-in-1 Stereo Microphone"
        channelmix.min-volume   = 0.0
        channelmix.max-volume   = 0.25
        channelmix.normalize    = true
      }
    }
  }
]

I know this is applying to the correct node, because executing wpctl status shows that the node description has been properly changed.

The problem is that the “channelmix.max-volume” is not applied as I expect it to be. I expect it to make it so that 25% max volume is the new 100%, Instead it seems to do nothing.

What am I doing wrong, and how can I achieve what I want?

Edit 1: Channel Mix is working, but it seems the “Volume” as of wpctl get-volume is referring to gain. Essentially Channel Mix is making it quieter, but the gain because of “Volume” is nonsensical.