We built a house 7 years ago and it’s insulated and has double glazing. I’ve installed Home Assistant with temp sensors in the bed rooms and seeing 70%+ humidity levels. Temperature is always above 16c

We ventilate it, but still it’s 70% in the bedrooms. WHO recommends 40-60%, so we’re a bit worried.

Living room is around 55% during the day when we have the heat pump set at 21c.

As it’s pretty humid outside I think it’s almost impossible to get it lower, but are there any other tips? I don’t want to run dehumidifiers. Would an HRV like system help?

  • Dave@lemmy.nzM
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    When you say Zigbee is local only, I presume if you have remote access to Home Assistant then you can use this to control them? But they don’t rely on a cloud server. That sounds ideal.

    • sylverstream@lemmy.nzOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Yes, Zigbee is a protocol for a mesh network. Mains powered devices like smart bulbs and smart plugs are routers as well to extend the coverage. Temp sensors are end devices only (and not a router). You also have Zwave but I think Zigbee is more popular.

      Downside is that not all Zigbee devices follow the Zigbee standard, it’s a bit of a mess sometimes.

      So… there’s a new kid, Matter and Thread. It’s very new, so not a lot of devices, but the SkyConnect dongle is Matter/Thread ready. It will come first to HASS, and afterwards to dockerized (another advantage for HASS).

      The benefits are that it’s indeed local only (i.e. your local network) and the batteries in end devices like temp sensors will last much longer than the wifi equivalent.

      I didn’t know about all of this 6 weeks ago, hope it makes sense.

      • Dave@lemmy.nzM
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        You’re making sense! I can’t want to dive in and get started, but will probably take a month for anything to arrive from ali express.

        • sylverstream@lemmy.nzOP
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Glad it makes sense! Delivery times seem to have improved. It still sometimes takes a month, the Zigbee smart plugs arrived within 10 days. For the SkyConnect I ordered at Seeedstudio and paid extra for quick delivery, it was here within 5 days. Any questions just DM me.

    • sylverstream@lemmy.nzOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Oh, for remote control to HA, I use Tailscale. So I can connect to HA from my phone anywhere by turning Tailscale on. And, I get e.g. notifications for motion sensors. Very convenient.