Yeah, but unlike other old people, we’re still cool, right? RIGHT???
Yeah, but unlike other old people, we’re still cool, right? RIGHT???
Every job I’ve had paid every other week.
Yes the hotend heats up and has molten plastic inside it and it gets pushed out the nozzle. I’m honestly not sure why they offer all those different versions as accessories. It includes a hotend and 0.4mm nozzle.
If you have a catastrophic issue it’s possible for the hotend to be clogged completely, but that’s never happened to me. It comes with a declogging tool which is just a long pokey wire to push up through the nozzle while it’s hot to clear it.
The nozzle itself can unscrew from the hot end and be replaced because it wears out over time from filament chipping away at it.
Also, you might want different nozzle diameters depending on what you’re printing. You can just buy spare nozzles without an entire hotend.
It comes with 0.4mm and they offer a range from like 0.2-1.0mm. The smaller nozzles print slower and more detailed while the larger nozzles are faster with lower resolution.
There’s a rabbit hole of things that can go wrong and things that need to be calibrated and upgraded. I had to assembley Ender 3 and ensure that everything was perfectly straight, level, and 90 degrees. Calibrate the z-offset so it knows where the nozzle is.
I added an auto bed leveling sensor to my Ender 3, and that required custom firmware, and I replaced the bed springs because it wasn’t staying level.
I calibrated the e-steps because it wasn’t extruding consistently, then ended up replacing the extruder because it was cheap and unreliable.
Humidity was ruining my filament on the spools and making it brittle and snapping so I built a dry box that could feed the printer, similar to the clear boxes on some Bambu models.
The Bambu really was as simple as unboxing and turning it on. It comes pre-assembled and includes a lot more sensors that are able to keep it working smoothly.
My vote is for Bambu printers. I started with a super cheap Ender 3 V2 in 2020 and recently we got a Bambu X1 at work and it’s so much easier, faster, and better. No more hours of troubleshooting issues, it just calibrates itself and goes.
The P1P is cheaper and might be a good option to look at. These printers are highly recommended on the reddit community too.
Yeah and it seems obvious that they shouldn’t be driving vehicles where people are laying. This is the third person I’ve heard of being run over by police on a beach this summer.
Oh lol
I love Ender’s Game, I’ve read it twice! Oohh yeah were they controlling ships via FPV in the war?
I just started flying FPV drones and in the Liftoff simulator on steam you can download models of Ukranian drones with payloads to practice flying one of these. I just thought that was interesting.
Thanks, I think the RGB shirt might be custom to him because the same image is his YouTube channel’s profile header image.
Does Technology Connections sell shirts? In most of his recent videos he has worn a black shirt with zoomed in RGB pixels from a digital display and I’ve been looking for it everywhere because I work in a related industry.
Side question: Should’t it also be illegal for Hallie Biden to dispose of an illegal firearm by putting it in a trash can outside a grocery store for a random person to find? That seems like a very irresponsible way to handle a firearm and evidence.
Cody Ko has a funny video walking us through the plot of Milf Manor. https://youtu.be/3hxhHyCcBqw
Thank you, I think it was a mix of anxiety/depression and life circumstances. The stress causes me not to eat enough in the first half of the day and I would feel very low energy.
Since then I’ve started a new job, moved across the country, got back into the gym, and that reset has helped a lot.
This was me except I was disappointed when the blood test came back completely healthy. I guess it’s all in my head after all…
This was the research done by Freakonomics!
We estimate that crime fell roughly 20% between 1997 and 2014 due to legalized abortion. The cumulative impact of legalized abortion on crime is roughly 45%, accounting for a very substantial portion of the roughly 50-55% overall decline from the peak of crime in the early 1990s.
Podcast revisiting this research with sources at the bottom:
https://freakonomics.com/podcast/abortion-and-crime-revisited/
This is the revisited research paper showing the connection (PDF):
https://bfi.uchicago.edu/wp-content/uploads/BFI_WP_201975.pdf
Cultural smells are interesting. In Japan, they find the strong scents of perfume, cologne, and even shampoo that westerners wear to be intolerable and people at restaurants will discreetly ask to change tables to move away from those wearing it. They are more sensitive to fragrances there while Americans have fragrance in almost everything.
Of course, the most respectful thing to do when traveling is to just take a shower and wear a neutral deodorant so that you’re not giving off any unique smells.
This situation sure sounds like it blew up into a racist power trip though.
Thanks I’m going to give this a try.
They were in violation of the TOS for abusing CF’s IPs with site rotation to circumvent IP bans to their online casino. They need an enterprise plan to BYOIP with their level of traffic. They were given 48 hours notice of site deletion but were given almost 2 weeks before doing so. Read the comment at the bottom of the substack post for further detail.
I’d like to subscribe to 1930’s animal facts please.