Try the debian instructions instead here, there are instructions for raspberry pi os but they direct you to the debian page for 64bit raspberry pi os.

If that doesn’t work for you, definitely try the .deb route to install from a package

I’m a data engineer/architect and it’s the same over here, I get asked constantly “how can we stuff AI into this solution?”, never “should we consider using AI here? Is there a value?”, my view, people don’t understand their data and don’t want to put in the effort to understand their data and think that it’ll magically pull actionable insights from their dataswamp, nothing new, that’s been a constant for as long as I recall.

Like I totally understand the draw of new and exciting, but there’s so much you can do with traditional analytics, and in my view you really need to have a good foundation before doing anything else.

I swear historically they (the NDP) would have been vehemently against this as I recall them being very pro privacy in the past.

I’m also thinking that way wrt to “we need more fast charging for EVs to work”, I recall that plugging into a standard outlet will get you something like 5-8 km an hour, slow charging is totally acceptable for most people’s usages. If you’re in an area where block heaters are the norm you already have outlets at parking spots, if I could commute to work and plug it in, covers most commutes in a 8 hour day, even those of us who rarely go in and live 70k away I’d be getting most of my range back. For the amount I drive, level 1 charging is more than sufficient.

I think a compact with 2-300 k range would suit me just fine, would cover the odd longer trip and I’ll totally grab a rental for anything longer, like I already do it I need to move a fridge.

Totally get you, I swapped my prusa’s hotend for a stealthburner as well, they’re super nice to service, especially with the 2 part PCB, but having the entire assembly mounted from the front is fantastic.

Stealthburner ended up fixing your clog issues entirely?

Fingers crossed. There’s hats you can get to power the pi off of printer’s 24v supply, considering doing it on my klippered mk3s and switch that over to using a SBC instead of the laptop.

If you can swing it, definitely worth printing a spare set for the stealthburner + cw2, just in case you crack anything during assembly.

Really like the pathfinder games because you can swap between turn based or real-time on the fly, sometimes I want to think about my actions but other times yeah it gets repetitive

You’d think right, anecdotally when I was meaaign with undervolting on my desktop, you’d get instability or crashes at the limits without useful errors. Could think maybe the processor isn’t getting enough power and that’s causing instability? Found a klipper thread that about losing connection with the mcu which totally can show up as an EOF error.

How are you powering the pi itself? Wondering if the wakeup draw from your screen is enough to make it unstable, 4 I believe having higher power drawn than the 3 if you’re using the same power supply. Pi isn’t oced either?

Didn’t know that! Steam has some really nice features, steam input alone is amazing so I’ll definitely give that a try.

I’d love a Morrowind type journal to log some of that, totally get I can write things down outside the game, I’d just like to have that option in game especially as I can tend to jump around games and put them down for some time. They’re almost there with the player map markers and NPC markers, even just having the ability to make notes in game would be big for me.

Yeah, had that happen a few years ago, thankfully there was a consistent status attributes in the response that I could use but still, annoying

Yeah that’s how I did the mockup, I use superslicer on one printer and prusaslicer on the other so was hoping I could do something that’d be able to port between them easily.

On that thought, superslicer being based on prusa slicer, wonder if I could just import the project like I’ve done with filament profiles. Thanks!

Yeah I used inkscape for the image dxf, good thought on the text. I’ll try it in freecad again, had it die on me a few times so I started looking into alternates, thanks!

I remember bejng hype when it released and really wanting to watch it but ended up not keeping up after a few episodes. Did a rewatch a few years ago and man I didn’t give it as much of a chance as I probably should have, did it right after a bsg binge so was in that type of mood.

I’ll give that a try, thanks, figured it’d be something straightforward!

I have a large chunk of my colleagues who have little to no experience using CLI tools, and totally have found the last part to be true. In fairness, documentation is all over the place quality wise (I generally find Microsoft’s useful but I’ve totally had issues in the past with undocumented or vaguely documented features/dependencies). People will google their issues, and increasingly I’ve found it doesnt point you at the documentation directly, instead stack overflow or medium pages.

I feel like there’s definitely some conceptual… Stuff for lack of a better word that’s an issue, I’ve seen a number of people focus on the execution instead of trying to understand what’s the issue and define it logically, when pressed they struggle to explain.

Super regional, remember learning 15$ in French class but using $15 everywhere else because I’m an anglophone. Personally, as someone else said, it’s a unit, totally makes sense treating it as such and I do tend to use iso currency codes when talking dollars because I’m Canadian, 40 USD is 54.75 CAD, 40 CAD is 29.23 USD, if I don’t specify that it makes things look way more expensive comparatively.

For the v2 it’s actually in the sample klipper config under heater_bed as comments.

Totally understand, I’m thinking about building a small trident or 0.2 at some point for the same reason, I very rarely use the entire bed area of the 2.4

Just realised I misread, sorry about that, have a v2.4 not a 0.2, I’ll talk about my machine though, sorry about that!

There’s less thermal mass on a lot of bed slingers, at least on my franken-prusa, it’s just the PCB and the build surface vs what like 3-4 kg of aluminum that’s the voron build plate.

I have a 720 w 120vac heater on mine, it’s limited to run at 60% max (There’s documentation about max heating, don’t want to warp the bed) A v0.2 will heat up faster than mine, not even sure you would get much benefit from an ac heater at that size, the prusa heated bed is perfectly capable of hitting 120c no problem on 24 vdc in 5-10 minutes, 60c is super quick, been doing a lot of PLA on it lately and it’s pretty much at print temp after a quick bed and nozzle cleaning, totally imagine a 0.2 would hit print temps super fast. Still worth a heat soak imo, but depends what you’re printing, I don’t bother with PLA, petg, just a quick preheat and then I send it.