I am working on building a new server in my apartment that will have a reasonably beefy GPU and CPU so I can get PCIE pass-through working and get a gaming VM set up.
Trouble is, my apartment is in the attic in the south. With the AC on I had one or two really bad days last year that it got up to 90 degrees Fahrenheit inside with high humidity.
Any cooling suggestions for something like that? Is 90 degrees Fahrenheit still cool enough to reduce the temperature of my components? I would really like to avoid buying a phase change cooler, but that is the only thing I can think of if the ambient is too high.
Ok thanks I get it.
So I live in the attic of a 100 plus year old house. It has two rooms and a living room. The two rooms have window ac units and the rest of the windows that do open, for the most part, open sideways or are otherwise weird enough that another window unit probably isn’t too feasible.
I also have the HVAC unit that was shoved in here (you can see where they added on the ducts kind of shoddily).
With all of those going it still gets to 90 on very hot days towards the tail end of the peak temperature of the day.
I think what I am gonna do is buy a nice cpu cooler, leave the stock gpu cooler, and pay attention to fan placement (positive pressure I guess is what I am looking for?) and then just benchmark it at the hottest part of the day. It shouldn’t stay that hot all day and I am usually gaming later in the day or evening so I shouldn’t have the GPU introducing heat at least during the hot parts.
I have never done water cooling before but I am afraid that I will half ass it and spill everywhere is my only reason for pausing on that.
Now they do make water chillers and they appear to be cheaper than a dedicated phase change CPU cooler so potentially I could pipe the water to a reservoir that uses a water chiller to cool it down a couple degrees if I really wanted. That would still use phase change cooling but the heat from it could be away from computer case as well and if I build it such that it never gets too cold I shouldn’t have condensation issues inside the case.
Long story short, thank you for the advice. I think I am trying to optimize this before I even have a problem, so I think I need to start simple and then address problems as them come.
If you wanna go absolutely crazy, do a custom water loop and submerge the radiator in a 5 gallon bucket with a water pump to to circulate the water.
when your CPU or GPU starts to get too hot because the water in the 5 gallon bucket starts to get hot, scoop a gallon out with a smaller bucket and refill it with cooler water that you can easily fill up under the bathtub faucet.