Owners say they are noticing orange stains on the stainless steel panels of their new Cybertrucks.
Others are in favor of their Cybertrucks developing orange stains, saying that they’re looking forward to the patina the stainless steel may develop.
LOL - that’s some straight up 🤡 shit.
High on copeium.
When does the Cybertruck: limited COR-TEN® Steel edition come out?
I’m thinking that would actually appeal to some folks as a Mad Max sort of aesthetic.
After the Cybertruck aluminum and cardboard edition. For that derelique fashion
Hey Cybertruck, you can derelique my balls!
gottem
Rust can look great!
I doubt these will age well at all though
I fucking love patina on vehicles so much. This is definitely clown shit but point me towards a vehicle with copper panels and you can take all my money.
Ooh, that sounds hot as hell.
Make it yourself!
Maybe rivet pennies like scalemail on an existing car
My Metalbird is developing a patina that looks a lot like rust. Apparently that’s intentional and temporary but we’ll see. I only paid $60 not $100,000 so I’m not as upset as I imagine these people are.
In particular, oil and acidic soiling, such as tar or bird droppings, should be cleaned immediately with an alcohol-based solvent. Immediately afterwards, rinsing with clear water or a pH-adjusted soap is recommended. This type of cleaning should be necessary after every longer ride.
Nah.
Next thing it’ll demand you feed it nuclear pellets
Immediately imagine myself pouring a little bit of nuclear orbs into the front like I’m feeding a small animal.
“Here you go little buddy, eat up…”
You mean next to the weekly sacrifice of virgin blood and ritual singing? This thing is expensive!
Imagine having to do a systematic car wash after every weekly grocery trip lmao
Funny enough, I love going through the car wash. I like it so much that I have one of those unlimited wash deals at my local soft touch place. I probably get 3 washes a week on average.
But the idea that I’d have to do that is nuts. And the shit about special soap and whatever? No way.
Yeah I feel like if you could do a normal car wash that’d even be somewhat more practical, but having this specific sequence of solutions and soaps. It’s so wild they published that recommendation seriously
To be fair, a patina of rust will make it easier to imagine oneself as some kind of grimdark postapocalyptic warlord or something.
Anyone who’s worked with stainless could have told you that would happen 🤷
Uh… they’re Stainless not Rust-less, duh.
Maybe it’s stain less… it stains less, but it still stains.
For a couple years I worked at a company that mainly sold fasteners. Think nuts and bolts for residential, commercial and industrial use. They came in different grades (strength), materials and coatings based on usage (for example indoor or outdoor use).
I was told by other sales associates that “stain less” was more accurate than “stainless.” The reason being that if you expose stainless steel to water long enough, it will rust. However, it will take significantly longer to stain/rust compared to plain steel.
You want to use stainless steel in places where things will come into contact with water but not in situations where it will be submerged in water or exposed to the elements for long periods of time.
Your joke was pretty much how I was taught about stainless fasteners.
Sadly, no amount of money can teach a billionaire such simple things.
“it stains less than cast iron dipped in pig guts”
So, stain “less”, not stain “proof”
Never buy the first version of anything, especially something from musk.
Never buy
the first version ofanything,especially somethingfrom musk.
About the same level of quality as their software, it seems.
Send any complaints to:
Quabbity Assuance Dept.
c/o Creed Bratton
Don’t you mean 💩?
Quabbity Assuance lives rent free in my head.
So you have to treat it like a mogwai?
What if they covered the metal in some sort of protective coating? Perhaps even a colored waterproof coating. I think I heard of something like that once. It’s called paint.
They bought their stainless from the bargain bin…
I guess it’s safe to say the stainless steel is not marine grade 316.
From Tesla’s owners manual, referenced in the article:
Immediately remove corrosive substances (such as grease, oil, tree resin, dead insects…
I find it really funny that the folks at Tesla consider grease to be “corrosive”.
but it’s rusting because of the owners doing shit, or it is a design problem?
There are many varieties of stainless.
They chose to use the same stainless as the rockets, 301, which is not the best at resisting corrosion(rust) compared to other stainless varieties like 304 that was used on the DeLorean. Had they used 304 it is likely the rust wouldn’t be anywhere near as much of a problem, the DeLorean stainless panels are still looking great and may only need a polish every few years.
Likely they chose 301 over 304 because they are already buying it for Starship and it takes to forming somewhat better.
On the plus side the steel is 3mm thick and that leaves a considerable amount of material to polish with before adding a clear coat or a clear protective film if the vinyl film coating was not chosen when buying it.
Stainless steel, by definition, shouldn’t rust. This has nothing to do with the owners.
Stainless steel is resistant to a certain degree of corrosion depending on the specific type of steel. If Tesla went with a steel that’s resistant enough to handle rainwater but not resistant enough to handle salted roads or salty maritime air then their cars can rust even if they’re made with genuine stainless steel.
Of course that still means they chose the wrong steel.
that is incorrect: https://en.wikipedia.org/wiki/Stainless_steel
Stainless steel, also known as inox, corrosion-resistant steel (CRES) and rustless steel
Don’t give me that bullshit. If a kitchen sink that sees water every day doesn’t rust, neither should a $100K+ truck.
Your kitchen sink isn’t exposed to the elements like a vehicle is. You ever seen stainless industrial sinks? They don’t always look so great after 10-20 years of abuse.
If these trucks are exposed to salt on the roads during winter weather they probably won’t fair well. Even stainless steel is prone to corrosion and ought to be painted or plated.
You’re comparing 10 years of rough abuse with metal being thrown into them constantly as well as all the acids and salts used in cooking against a year of just existing outside.
Edit: it’s not even a year outside…it was 2 days.
One Cybertruck Owners Club forum member says they started noticing small orange flecks appearing on his truck after driving it in the rain for just two days.
Do the ions from the salts form acids that react with the metal?
If I understand correctly (and I hope I do with a degree in chemistry), it’s moreso the long periods of exposure to wet environments. If those environments also include frequent exposure to salt it expediates the transfer of electrons to the outer surface of the stainless steel and causes oxidation.
Oxidation/rust/petina isn’t a bad thing. A thin outer layer of rust is sometimes used as an aesthetic preservative in architecture though. There are buildings that have heavy surface rust on them intentionally.
Probably not what you’d expect or desire on a vehicle, but very much possible. I wonder how the DeLorean DMC-12 held up in nasty conditions?
known as rustless steel
Corrosion resistance Although stainless steel does rust, this only affects the outer few layers of atoms, its chromium content shielding deeper layers from oxidation.
If they had picked the correct grade of stainless steel, it wouldn’t rust just by being outside. Cheaper grades rust, higher grades don’t.
Fun fact: the soviets simply used thicker steel. That’s partly why there’s so many of those shitboxes still riding around the ex-soviet block. Based on the Fiat 124, which often rusted and died in the Italian sunshine, the Soviet variant often rusted but survived in Siberia.
Put something rusty in contact with that sink for a little while and get back to us.
I have. I scrubbed the rust off with steel wool. As long as you don’t leave rusted iron against stainless steel for years, it’s fine. And that’s not what’s happening here.
So… you’ve experienced stainless rusting first hand and yet claim it doesn’t rust…?
Stainless rusts, fucking hell lmfao.
It doesn’t matter that it’s not what’s happening, it rusts. It’s that simple, any imperfection from salt or iron oxide (from rocks in asphalt) is a place for rust to start.
The stainless steel didn’t rust. The cast iron pan was accidentally left on the corner of the sink for a weekend with a little water under it. The rust wiped off very easily, because it was transfered from the iron into it, which is all that’s happening as long as it’s not left there for a significant amount of time.
The truck was driven in rain, with no snow or salt involved, and began rusting after 2 days. That’s a low grade of stainless steel to rust that fast.
Stainless steel rusts easily, especially in the presence of salt. It’s stain less, not rust proof.
It was in rain for 2 days. It shouldn’t rust after only 2 days.
Rain, maybe some left over road salt, sand, and constant vibration and abrasion… It’s gonna rust. Maybe not a lot, but it will.
Not after 2 days. High grade stainless steel, which these trucks are obviously not using, will take a lot longer than that even with abuse. That’s the entire point of stainless steel.
It’ll still rust dude, it’s only a matter of time depending on grade.
There is no such thing as rust proof steel, just steel that takes longer to rust in perfect conditions….
Do you know why stainless steel is not used in sea ships?
Do you know that 316 grade stainless steel exists, and that sea water has nothing to do with a truck that was rained on for 2 days? Seriously, bringing up irrelevant shit does not make your argument better…
