CAD is one of those hold-out areas for windows which is actually kinda strange because when it comes to non-CAD 3D software a lot of the big names are UNIX-native and got ported to windows at some point: Houdini, Maya and Blender all got their start on IRIX and run perfectly fine on Linux, 3dsmax… well, Autodesk. Somehow they started out writing their software for DOS and became dominant in the CAD market despite that.
Speaking of Blender did recently get its feet wet with some CADish constraint modelling but I’m sure it’s nowhere close to where it’s usable for engineers. If you’re an artist modelling something mechanical it’s damn useful, though, and it might be sufficient for some light hobby usage, that is, to feed a 3d printer.
While I wear the sackcloth and ashes of FreeCAD, it is a full 3D modeling suite and is perhaps more than you need.
For something free and fairly simple in 3D modeling you could try TinkerCAD. This is a cloud based CAD that just runs in your browser and is often a gateway into more complex modeling for 3D printing. Many people find it all they need for the basic modeling they want for 3D printing. They do have some tutorials to get you started. I have taught it to 4th grade students using iPads for very simple 3D models they could 3D print.
Another easy to access program is OnShape. This is another cloud based, run in a browser 3D CAD solution. While it is aimed for commercial paid usage, they do offer a restricted free hobby licence. This is a “real” 3D modeling program and the interface and tools reflect that. But they do offer free modeling tutorials and videos to learn with. And their help search is very extensive and written in plain language to follow. I have taught OnShape to high school students because it would easily run on their school issued education Chromebooks. The most difficult part was getting the kids to use a mouse - they are all about touch pads and screens these. And CAD software ain’t made for that.
As far as being “Intuitive” well, when you are learning ANY new thing, it’s going to seem like that at first. You need need to learn how to think before you can do something with a new tool. And mastering CAD software means you need to learn how to think about design before you can worry too much about where the buttons are. And you learn how to think by doing and failing - often repeatedly. But if you pay attention to what you are doing and try to remember how things worked, you will start to learn how to think.
So pick a piece of software that works on Linux. Do a bit of google and find some tutorials for your choice of CAD and then do the tutorials. Do them more than once! Do them until YOU are comfortable with the process. And then keep practicing. I have been using various CAD softwares for 30 years and I still need to practice. Otherwise I lose the skills.
Heh, no problems here using a CAD software it’s just that am always hunting for options. Currently am set on SolveSpace and OpenSCAD for simpler models. SolveSpace is good enough for pretty much all of my needs. It’s a bit more of manual work instead of clicking an option, chamfers being one example, but I come from machine engineering high school so that way of work suits me just well as we use to draw everything by hand, so I am no stranger to planning ahead anyway.
So far I have avoided cloud solutions but I guess that has evolved a lot by now. How do they fair with more complex shapes with more restrictions?
OnShape will restrict the number of active drawings you can work on at a time. It’s a simple matter of turning them on and off. Worst part of OnShape is all your work is public, (they are very up front about this), and can’t be hidden. But, you can make a single model as complex as you wish. It’s always the latest and greatest version of OnShape every time you log in. And it simply works on any platform that can open a web browser. There is even an app for your phone. I don’t really use it at home because I live in a very rural area and electricity can be kind of sketchy at times, let alone the internet. So it can be unreliable for me.
Fusion360 is quite popular due to the perceived ease of use. To be fair there are a ton of very good tutorials for it and the documentation is top notch. Having used a few different CAD packages over 30 years, I’m not overly impressed by it - it’s not better or worse than any other choice when you start really working it. I don’t care for how much of the “good stuff” they have locked away unless you pay to play. But most hobby users won’t notice that issue. They just want an .stl to 3D print - which Fusion is pretty slow to output. And because Fusion uses a half-arsed half local/half cloud solution, (Windows only need apply), and it updates on login it is slow to load, which I dislike. Plus if you do lose the internet, it severely cripples your work until you can log back in.
SolidEdge offers a free hobby version and it worked pretty well when I messed with it for a couple of months. It had a SolidWorks feel to it for me. It’s a local install and requires no internet to use. I thought the assembly was limited and not always super intuitive. But it’s been a few years since I tried it.
I just use FreeCAD now. I like the local install/run. And right now things are changing for the better with it. Lots of new features and more importantly improvements to the underlying code to make things more robust are coming in the development releases. And more and more excellent tutorials are being created and released. If you are willing to learn, FreeCAD offers a full 3D modeling experience.
Overall, you can design rocket ships to the stars with any of the online CAD solutions, well maybe not TinkerCAD. But, like any other free version of commercial software, they will impose limits on us freeloaders. Try one and see if you like them and it suits your needs.
But a very large number of users simply don’t care about avoiding cloud solutions or using Linux. And OnShape does offer some unique solutions to low powered computing/agnostic OS uses and for the more corporate minded needs, the ability of two users to be able to work on the same model at the same time and see each other’s changes in real time. Which can lead to faster collaborations and iterations of a design. And as someone who has wasted weeks of my life emailing design changes back and forth, this would have been a very handy thing at times.
Having tested OnShape years ago, where it already appeared very feature rich and smooth, I have no doupt one can for sure realize complex multi-part assemblies with it. For me the interesting part, in a professional environment, would be the software’s capabilities of its drawing module. Full digital workflows seem to gain track, but for me detailed technical drawings are still the bread and butter application of a CAD.
For private use strictly FreeCAD, at the job Inventor Professional. While FreeCAD is ‘not there yet’ in many regards, it’s a great piece of software -if- you accept the flat learning curve and invest time.
But I understand what you’re saying. If you already have a solid understanding of CAD-basics, you rapidly understand what the programmers want to achieve and get there relatively fast. If you expect tabet-esque convenience (which I think from a professional standpoint should not be the goal for a parametric modeler) I get that people get frustrated.
Ah, I thought as much. I assumed it must be FreeCAD as it’s the most feature rich one. These days whenever I need CAD I usually turn to SolveSpace which is also parametric but significantly lighter and straight to the point. For sure it lacks some of the useful features FreeCAD has but I rarely need those. Another one I reach out for is OpenSCAD, being a software developer this one clicks very well with me.
Ditto. Seems like everyone uses AutoDesk or Bentley. Although I use them both regularly, they both fail pretty hard in some areas. Now there’s talk about BricsCAD. I’ve got my reasons to hate it that I don’t want to get into, but it is platform independent (as every piece of professional software should be). It’ll run on Linux, Mac, and Windows.
I went to Linux for all private use years ago. And man - I wish so very hard I could simply switch to a non win-native CAD at the job.
Ditto. Decade & a half but video games rather in the beginning.
CAD is one of those hold-out areas for windows which is actually kinda strange because when it comes to non-CAD 3D software a lot of the big names are UNIX-native and got ported to windows at some point: Houdini, Maya and Blender all got their start on IRIX and run perfectly fine on Linux, 3dsmax… well, Autodesk. Somehow they started out writing their software for DOS and became dominant in the CAD market despite that.
Speaking of Blender did recently get its feet wet with some CADish constraint modelling but I’m sure it’s nowhere close to where it’s usable for engineers. If you’re an artist modelling something mechanical it’s damn useful, though, and it might be sufficient for some light hobby usage, that is, to feed a 3d printer.
Even within the CAD space, I was running CATIA natively years ago under Linux.
Which Linux CAD software do you use? My needs are very simple, but pretty much everything I’ve tried is either unintuitive or lacking in some aspect.
While I wear the sackcloth and ashes of FreeCAD, it is a full 3D modeling suite and is perhaps more than you need.
For something free and fairly simple in 3D modeling you could try TinkerCAD. This is a cloud based CAD that just runs in your browser and is often a gateway into more complex modeling for 3D printing. Many people find it all they need for the basic modeling they want for 3D printing. They do have some tutorials to get you started. I have taught it to 4th grade students using iPads for very simple 3D models they could 3D print.
Another easy to access program is OnShape. This is another cloud based, run in a browser 3D CAD solution. While it is aimed for commercial paid usage, they do offer a restricted free hobby licence. This is a “real” 3D modeling program and the interface and tools reflect that. But they do offer free modeling tutorials and videos to learn with. And their help search is very extensive and written in plain language to follow. I have taught OnShape to high school students because it would easily run on their school issued education Chromebooks. The most difficult part was getting the kids to use a mouse - they are all about touch pads and screens these. And CAD software ain’t made for that.
As far as being “Intuitive” well, when you are learning ANY new thing, it’s going to seem like that at first. You need need to learn how to think before you can do something with a new tool. And mastering CAD software means you need to learn how to think about design before you can worry too much about where the buttons are. And you learn how to think by doing and failing - often repeatedly. But if you pay attention to what you are doing and try to remember how things worked, you will start to learn how to think.
So pick a piece of software that works on Linux. Do a bit of google and find some tutorials for your choice of CAD and then do the tutorials. Do them more than once! Do them until YOU are comfortable with the process. And then keep practicing. I have been using various CAD softwares for 30 years and I still need to practice. Otherwise I lose the skills.
You can do this!
Heh, no problems here using a CAD software it’s just that am always hunting for options. Currently am set on SolveSpace and OpenSCAD for simpler models. SolveSpace is good enough for pretty much all of my needs. It’s a bit more of manual work instead of clicking an option, chamfers being one example, but I come from machine engineering high school so that way of work suits me just well as we use to draw everything by hand, so I am no stranger to planning ahead anyway.
So far I have avoided cloud solutions but I guess that has evolved a lot by now. How do they fair with more complex shapes with more restrictions?
OnShape will restrict the number of active drawings you can work on at a time. It’s a simple matter of turning them on and off. Worst part of OnShape is all your work is public, (they are very up front about this), and can’t be hidden. But, you can make a single model as complex as you wish. It’s always the latest and greatest version of OnShape every time you log in. And it simply works on any platform that can open a web browser. There is even an app for your phone. I don’t really use it at home because I live in a very rural area and electricity can be kind of sketchy at times, let alone the internet. So it can be unreliable for me.
Fusion360 is quite popular due to the perceived ease of use. To be fair there are a ton of very good tutorials for it and the documentation is top notch. Having used a few different CAD packages over 30 years, I’m not overly impressed by it - it’s not better or worse than any other choice when you start really working it. I don’t care for how much of the “good stuff” they have locked away unless you pay to play. But most hobby users won’t notice that issue. They just want an .stl to 3D print - which Fusion is pretty slow to output. And because Fusion uses a half-arsed half local/half cloud solution, (Windows only need apply), and it updates on login it is slow to load, which I dislike. Plus if you do lose the internet, it severely cripples your work until you can log back in.
SolidEdge offers a free hobby version and it worked pretty well when I messed with it for a couple of months. It had a SolidWorks feel to it for me. It’s a local install and requires no internet to use. I thought the assembly was limited and not always super intuitive. But it’s been a few years since I tried it.
I just use FreeCAD now. I like the local install/run. And right now things are changing for the better with it. Lots of new features and more importantly improvements to the underlying code to make things more robust are coming in the development releases. And more and more excellent tutorials are being created and released. If you are willing to learn, FreeCAD offers a full 3D modeling experience.
Overall, you can design rocket ships to the stars with any of the online CAD solutions, well maybe not TinkerCAD. But, like any other free version of commercial software, they will impose limits on us freeloaders. Try one and see if you like them and it suits your needs.
Thanks. I’d love Fusion or SolidEdge, but they don’t support Linux. And am not keen on always-online solutions.
Neither am I - hence FreeCAD.
But a very large number of users simply don’t care about avoiding cloud solutions or using Linux. And OnShape does offer some unique solutions to low powered computing/agnostic OS uses and for the more corporate minded needs, the ability of two users to be able to work on the same model at the same time and see each other’s changes in real time. Which can lead to faster collaborations and iterations of a design. And as someone who has wasted weeks of my life emailing design changes back and forth, this would have been a very handy thing at times.
Having tested OnShape years ago, where it already appeared very feature rich and smooth, I have no doupt one can for sure realize complex multi-part assemblies with it. For me the interesting part, in a professional environment, would be the software’s capabilities of its drawing module. Full digital workflows seem to gain track, but for me detailed technical drawings are still the bread and butter application of a CAD.
For private use strictly FreeCAD, at the job Inventor Professional. While FreeCAD is ‘not there yet’ in many regards, it’s a great piece of software -if- you accept the flat learning curve and invest time. But I understand what you’re saying. If you already have a solid understanding of CAD-basics, you rapidly understand what the programmers want to achieve and get there relatively fast. If you expect tabet-esque convenience (which I think from a professional standpoint should not be the goal for a parametric modeler) I get that people get frustrated.
Ah, I thought as much. I assumed it must be FreeCAD as it’s the most feature rich one. These days whenever I need CAD I usually turn to SolveSpace which is also parametric but significantly lighter and straight to the point. For sure it lacks some of the useful features FreeCAD has but I rarely need those. Another one I reach out for is OpenSCAD, being a software developer this one clicks very well with me.
Ditto. Seems like everyone uses AutoDesk or Bentley. Although I use them both regularly, they both fail pretty hard in some areas. Now there’s talk about BricsCAD. I’ve got my reasons to hate it that I don’t want to get into, but it is platform independent (as every piece of professional software should be). It’ll run on Linux, Mac, and Windows.