GreenBubbleB0y@lemmy.world to homeassistant@lemmy.worldEnglish · 1 year agoOutdoor Temperature Sensormessage-squaremessage-square30fedilinkarrow-up153arrow-down12file-text
arrow-up151arrow-down1message-squareOutdoor Temperature SensorGreenBubbleB0y@lemmy.world to homeassistant@lemmy.worldEnglish · 1 year agomessage-square30fedilinkfile-text
I’d like to get an outdoor Temperature Sensor that can be used with HA and Google Home. Anyone have any recommendations?
minus-squareDerek@social.dssc.iolinkfedilinkarrow-up13·1 year agoI use this one: https://www.aqara.com/us/temperature_humidity_sensor.html If you already have ZigBee setup it’s easy to use these, if not maybe look for something else.
minus-squareEinfachUnersetzlich@lemm.eelinkfedilinkEnglisharrow-up4·1 year agoI have two of these outside, jankily sealed up with electrical tape, and they’ve survived the British weather for a year so far.
minus-squareSlovenianSocket@lemmy.calinkfedilinkEnglisharrow-up4·1 year agoYup these are great, sonoff also makes zigbee sensors. Best to buy them off AliExpress, a lot cheaper on there
minus-squareStampela@startrek.websitelinkfedilinkEnglisharrow-up4·1 year agoSame one I use, also made an enclosure to 3D print and protect it from rain. It’s been going on without issues since 2020 https://www.printables.com/model/169425-xiaomi-aquara-thermometer-outdoor-case
minus-squareAdamLC@lemmy.worldlinkfedilinkEnglisharrow-up2·1 year agoI also use one of these outside with a 3D printed case. Still going strong after about 18 months!
minus-squareFireantz@lemmy.worldlinkfedilinkEnglisharrow-up2·1 year agoI have one of these outside stuck to my soffit, not in a case, and it’s been solid for me.
I use this one: https://www.aqara.com/us/temperature_humidity_sensor.html
If you already have ZigBee setup it’s easy to use these, if not maybe look for something else.
I have two of these outside, jankily sealed up with electrical tape, and they’ve survived the British weather for a year so far.
Yup these are great, sonoff also makes zigbee sensors. Best to buy them off AliExpress, a lot cheaper on there
Same one I use, also made an enclosure to 3D print and protect it from rain. It’s been going on without issues since 2020 https://www.printables.com/model/169425-xiaomi-aquara-thermometer-outdoor-case
I also use one of these outside with a 3D printed case. Still going strong after about 18 months!
I have one of these outside stuck to my soffit, not in a case, and it’s been solid for me.