Personally, after I graduated from pis I went to proxmox, for the simple reason of if I wanted to experiment with anything I could just spin up a new VM and test it out. Everything I have running in my lab is a VM. The only thing I run bare metal is opnsense, truenas and one pi.

Don’t be afraid to nuke everything and start again. Also make sure you take notes on what you do, what sites you visit, code you copy and paste. Obsidian and SilverBullet have been a godsend when it come to learning from my own mistakes.

Oh and by the way, it’s easy to feel overwhelmed starting out in this. My advice is to set yourself small, achievable goals to help break it up. Start by doing your hardware upgrade, then work out what your host OS will be and install it. Then work out how you want to use it, what you want to containerise, what you want to run in VMs.

be prepared to knock it all over and start again. Everyone rebuilds their environment, usually after learning how they could do it better. And most of all, have fun!

I can’t point to any decent resources, but in your shoes I’d probably download a Debian based distro that’s similar to what you used on your pi’s (Ubuntu server or Debian itself), learn how to use docker (see the other post where a user is asking about containerisation today for community responses) and set up a reverse proxy like Caddy to safely host your content on your lan and once you’ve got it working on there then think about internet access and whether you want to go down the VPS/Cloudfront route for public access to your goodies.

Given how Plex is trying to diversify away from self hosted content, give Jellyfin a spin - it’s surprisingly good and supported by anything with a browser, iOS, android, firestick, kodi or whatever!

Proxmox might be what you’re looking for, it’s very popular among homelab users and allows you to run VMs and Containers natively so you have the best of both worlds.

As to which you should use (Docker or VMs), neither is a silver bullet. I’m going to oversimplify it a bit, but in a nutshell:

Containers lend very well to microservices like web apps and processes you want to run isolated but don’t need a whole VM for. I can go into this in more depth if it helps you.

VMs are better suited when you have a disproportionately more resource hungry service (like database servers). They also allow easier deployment of things alongside the application, for example if you have monitoring agents. The downside is VMs add a maintenance overhead for the underlying OS (this is true of containers too but less so as you’ll often run many containers on one host).

In my environment I use VMware ESX for the hypervisors, manage it with vCenter and run mostly Linux machines with a mix of traditionally installed services and Docker standalone. There are some highly resource intensive services that even get their own physical host, like my NVR (for CCTV cameras) and backup server.

Hope I’ve answered more questions than I’ve created!

I feel you. I was where you are 2 years ago and it was really hard to start off.

I’d suggest starting installing Debian as an OS. Then, go for Docker.

If you feel lost, you can take a look at some videos from DBTech on YouTube. Look at his playlists to sort what you need.

Remember to document everything you do, because you’ll forget what you did to make things work your way.

Have fun !

This depends on the machine you have.

I would choose a hypervisor, if I had plenty of RAM (32 GB+) and CPU and wanted to have everything properly separated with the option to easily redo things, backup VMs and container, experiment with different setups and also wanted to learn new things. There are plenty of options. Proxmox might be the easiest to get started with and also to get help from the selfhosted community.

If I had limited resources, I would just use docker/docker-compose directly. It is more commonly used than lxc and doesn’t have the overhead of a VM.

Regarding safe and secure access: This is a rabbit hole.

I personally don’t use cloudflare, a lot of people do. Use a reverse proxy and generate a ssl certificate for all domains used. (Traefik, caddy, npm et cetera). Try to keep services up to date. Separate networks from each other. Think about which services you really have to expose publicly.

I was on the same boat few months ago. Went for Debian OS and then docker containers for almost all services. Portainer is awesome web UI to manage all containers so thats what I install first. Starting up new services is about copy paste docker-compose with slight modifications for your needs. My server is accessible through wireguard connection and that should be one of the most secure ways and probably the easiest to setup afaik (downside of wireguard is that you have to setup each device to allow connection - AKA scanning qr code)

Just saying what I did, most people here are more experienced and Im still learning.

GL and HF

I’m kinda in the same boat. Super into tech and computers and know my way around Windows, Mac, and a fair understanding of Debian based Linux… But self hosting still holds many questions to me.

Today, i just discovered that you can use CloudFlare VPN tunneling to basically “convert” a local ISP provided IP directly to a public IP without the need for a dedicated IP. I’m still at work but I’ll probably start tinkering with it once I get home. Would love to host Mastodon and Lemmy at home instead of paying a monthly fee just for some light to moderate social media use.

I also want to run some home automation stuff as well as a few static html websites. I know currently what is possible and the basic understanding of how it works, I just need more time to practice!

Feel free to hit me up in DMs if you have any questions or want to exchange notes. Seems like we’re both in a similar place rn.