Unless you want a desk setup. I have 2 monitors, kb, mouse, external dac, usb extension for thumbdrives, ethernet, usb soundcard for my mic and a kvm. That’s dp, hdmi, 6 usb-a, ethernet and I still sometimes plug-in 1-3 devices to charge them.
It’s not about it being practical. It’s about if it’s actually doable or not and how well it would work. Having the native ports will always be better that using a hub/dock.
Strongly disagree. I use a laptop with a thunderbolt dock. Being able to plug in a single cable to provide power, connect my monitor, all of my input devices, Ethernet, and anything else in a single cable is awesome. If I had to plug 10 things in manually it would be quite cumbersome. I disconnect the laptop daily as I bring it between work and home, as well as use it, well, as a portable laptop.
What you could do now is step out of your bubble and consider that other people have different use cases and might need or prefer to have more native ports.
You literally lose nothing by having more connectivity options.
I don’t see how that’s so terrible. It would slightly phisically bigger (if that) but it wouldn’t weight more and you wouldn’t need to carry around a hub.
Like I already said to another user: No. There are more than a few use cases that require a mobile set up for demos for example but that you’d also want to use in a desk setting. For example, architects or sw dev.
Why are you making an effort to justify getting shafted by corporations?
In this situation a hub is still better. You can pack all the stuff away plugged into the hub for easier set up. If your plugging that all into your laptop, you’ll need to plug it all back in again when you move.
We aren’t justifying getting shafted by corporations. What I and the other person are saying is that at some point as your connections and cables multiply, you need to consolidate and streamline your setup for it to be more practical and actually mobile. I’m all for having all the basic necessity ports on my laptop, but when your desk ends up as a mess of cables and pulling out and putting back your laptop becomes bothersome with having to attach/re-attach everything every time, having a dock makes it much simpler. Subjecting yourself to setting up all those cables on both ends instead of just one end is the opposite of having a mobile workstation for quick setup and cleanup.
There’s no real reason why you’d have to choose having a few ports + a hub or tons of ports + the option of using a hub.
If you prefer to “consolidate” your devices to a single poinf of failure on an external device then by all means, go ahead. I just think that it’s pretty crappy that options are being artificially limited and users of all people are making excuses for it.
Unless you want a desk setup. I have 2 monitors, kb, mouse, external dac, usb extension for thumbdrives, ethernet, usb soundcard for my mic and a kvm. That’s dp, hdmi, 6 usb-a, ethernet and I still sometimes plug-in 1-3 devices to charge them.
With that many connections, using a dock or a monitor with thunderbolt seems more practical than having a ton of stuff plugged into your laptop.
It’s not about it being practical. It’s about if it’s actually doable or not and how well it would work. Having the native ports will always be better that using a hub/dock.
Strongly disagree. I use a laptop with a thunderbolt dock. Being able to plug in a single cable to provide power, connect my monitor, all of my input devices, Ethernet, and anything else in a single cable is awesome. If I had to plug 10 things in manually it would be quite cumbersome. I disconnect the laptop daily as I bring it between work and home, as well as use it, well, as a portable laptop.
Kudos to you.
What you could do now is step out of your bubble and consider that other people have different use cases and might need or prefer to have more native ports.
You literally lose nothing by having more connectivity options.
Except the device inevitably ends up bigger and chunkier.
I don’t see how that’s so terrible. It would slightly phisically bigger (if that) but it wouldn’t weight more and you wouldn’t need to carry around a hub.
Of course it will weigh more, those ports and the boards to drive them weigh something.
If you’re worried about 50-100gr then you should hit the gym my friend.
Also, that hub you’d have to carry around weighs more than just having the ports on the laptop.
Yeah, because plugging in one thing is way harder than plugging in six.
This is a classic use case for a laptop dock.
That’s a very lazy, short-sighted and first world problem way of looking at this issue.
Why would having the option of using either a hub or plugging things on separately be worse than only being able to use a hub?
Because I don’t want a chonky boi laptop to carry around.
A couple more ports wouldn’t make your laptop “chonky”.
It sounds like you need a desktop computer or a docking station.
That’s a use case for a laptop dock if ever there was one.
Like I already said to another user: No. There are more than a few use cases that require a mobile set up for demos for example but that you’d also want to use in a desk setting. For example, architects or sw dev.
Why are you making an effort to justify getting shafted by corporations?
In this situation a hub is still better. You can pack all the stuff away plugged into the hub for easier set up. If your plugging that all into your laptop, you’ll need to plug it all back in again when you move.
Which might be an issue for you but it’s not for me. Also, I prefer the flexibility to have all of the ports I might need, natively.
We aren’t justifying getting shafted by corporations. What I and the other person are saying is that at some point as your connections and cables multiply, you need to consolidate and streamline your setup for it to be more practical and actually mobile. I’m all for having all the basic necessity ports on my laptop, but when your desk ends up as a mess of cables and pulling out and putting back your laptop becomes bothersome with having to attach/re-attach everything every time, having a dock makes it much simpler. Subjecting yourself to setting up all those cables on both ends instead of just one end is the opposite of having a mobile workstation for quick setup and cleanup.
You’re still missing the forest for the trees.
There’s no real reason why you’d have to choose having a few ports + a hub or tons of ports + the option of using a hub.
If you prefer to “consolidate” your devices to a single poinf of failure on an external device then by all means, go ahead. I just think that it’s pretty crappy that options are being artificially limited and users of all people are making excuses for it.