remotelove@lemmy.ca to 3DPrinting@lemmy.worldEnglish · edit-23 months agoSide project: Isopropyl distillation from resin printing rinsinglemmy.caimagemessage-square22fedilinkarrow-up1119arrow-down18file-text
arrow-up1111arrow-down1imageSide project: Isopropyl distillation from resin printing rinsinglemmy.caremotelove@lemmy.ca to 3DPrinting@lemmy.worldEnglish · edit-23 months agomessage-square22fedilinkfile-text
Edit: Deleting this post. It’s starting to get controversial, but that’s OK. Not what I planned on, but whatevers.
minus-squareplandeka@lemmy.worldlinkfedilinkEnglisharrow-up2·3 months agoWhat I do is just expose the dirty isopropanol to sun or UV in general - the resin will precipitate. Then just filter it out and you have clean isopropanol.
minus-squareplandeka@lemmy.worldlinkfedilinkEnglisharrow-up4·3 months agoI see, to be honest I have not checked how clean it actually is. It is visually transparent, as opposed to the used one, but you are probably correct.
What I do is just expose the dirty isopropanol to sun or UV in general - the resin will precipitate. Then just filter it out and you have clean isopropanol.
deleted by creator
I see, to be honest I have not checked how clean it actually is. It is visually transparent, as opposed to the used one, but you are probably correct.