Hiya, so am looking to buy more storage and while browsing am seeing some external harddisks, such as Western Digital My Book and Seagate Expansion Desktop for cheaper than the internal harddisks themselves. Have seen this one video from KTZ Systems where he bought up multiple of these external ones just to open them up and use the disks for his own server. Was therefore wondering if you peeps have ever done this and if there any downsides to it at all?

  • SayCyberOnceMore@feddit.uk
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    1
    ·
    6 months ago

    This must’ve changed as I’ve shucked WD Elements / Book drives and they were normal drives…

    So, you’re saying the actual harddrive has a USB chipset onboard and only a USB interface?

    When did this start happening?

    • Faceman🇦🇺@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      the 2.5" size of disks are now mostly direct USB controller disks rather than sata adapters internally.

      3.5" disks are still SATA as far as i’ve seen but the actual sku’s of the disks are often the lower grades. like you will get a disk that looks like another good disk but with only 64mb of dram instead of 256 on the one you would buy as a bare internal drive for example so they can end up a bit slower. and warranties are usually void.

    • norbert@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      6 months ago

      I’ve shucked probably 100s of those WD essentials and they just had a little SATA -> USB adapter on it. It’s been a few years but it doesn’t seem like they’d make a whole new PCB just to include USB.

      • Dhs92@programming.dev
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Within the past 2-3 years drive manufacturers have been swapping to USB PCBs directly attached to the drive controller, instead of using a SATA -> USB interface.