The drawback is that evildoers can still attack the WPA2 handshakes and can force devices to downgrade, so you’re still getting effectively WPA2 level security until you actually turn off WPA2.
But if it doesn’t cost you anything, you can just turn it on and make their life just s little bit harder.
If your devices all support WPA3, go for it. There’s a good chance older things won’t.
Most routers include backwards compatibility with WPA2 as a fallback, while newer devices will use WPA3. Should be relatively seamless
The drawback is that evildoers can still attack the WPA2 handshakes and can force devices to downgrade, so you’re still getting effectively WPA2 level security until you actually turn off WPA2.
But if it doesn’t cost you anything, you can just turn it on and make their life just s little bit harder.
Maybe vlan or DMZ a wpa2 network and use wpa3 with no fallback to wpa2 on the main/lan network?
In my case that would mean that over 70% would be in the DMZ… It would be the main network
Yeah but as long as important data is not able to be accessed via the wpa2 network then you are all good.
When I put my network on wpa3/2 mode my Xbox would not longer connect.
Use Ethernet it’ll connect no matter what wireless security you have enabled
Yeah, it’s on my list to run some Ethernet from my basement to the attic. Right now I have one wire running up the outside of the wall to the AP.
Don’t be afraid to add extra APs or switches if necessary