hey all. I’ve tried different ram, a different windows version, I’ve messed around in bios and updated it as well. How can i get my pc to register the rest of my ram??

-cross posting-

  • Vestria@beehaw.org
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    Since what everyone else has suggested hasn’t worked, there’s 3 more things to test:

    1. Update your BIOS. Depending on the age difference between your CPU and your MOBO, the BIOS might not be configured correctly for your CPU and thus half your RAM is unable to be addressed.

    2. Test your RAM sticks and memory slots individually. Put your sticks in the primary channel (per your MOBO specs) one at a time and reboot to see if they’re actually working. Then try moving them around to see if the issue is a bad slot, rather than a bad stick.

    3. Are you sure you’re not running a 32-bit OS? You’d be capped at 4GB system memory on 32-bit Windows, for example, no matter how much physical RAM you have.

      • The_Terrible_Humbaba@beehaw.org
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        Sort of, it depends on implementation. There are some techniques (which I don’t really know) that will allow a 32 bit OS to address more than 4GB, but natively it can’t for the same reason that the process will still be limited to 4GB.

        Perhaps you already know this but: 32 bits can only represent 2^32 numbers (4.294.967.296), which is how many bytes 4GB is equivalent to, and so anything after that cannot be reached. This also means 64 bits can address up to something like 17 billion GB, or about 16 EB.

    • NewtAmbrose@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Tried updating my bios but when attempting to through the bios itself it states “not a valid bios” even though it’s through the updater built in??

      • Vestria@beehaw.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Do you mean you’re getting an error message saying the “selected file is not a proper BIOS file”?

        Or are you getting a different error? If it’s the above, you’ll need to remove and redownload the updated BIOS, as it was corrupted during download, and you’ll need to make sure you have a stable connection while downloading to avoid it happening again.

        If you’re getting a different error I’d need to know the exact wording to help any further.

  • frog 🐸@beehaw.org
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    I had this exact issue a couple of years ago. Exactly the same problem: 16gb installed (and recognised by the BIOS), but Windows wouldn’t use more than 8gb, even though it could detect its presence. And right now, I’m really annoyed with myself for not being able to remember what the fix was. It was… definitely something hardware-related, not software/configuration. I’m off to bed now, so if it comes to me overnight, I’ll pop back in tomorrow.

    • jennifilm@beehaw.org
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Same - had exactly this problem. I’m not exactly sure if I found a real fix in the end, it just eventually inexplicably started working. Think I tried changing ram slots and having to change some options in the bios - might be worth trying there as a start!

  • Dankenstein@beehaw.org
    link
    fedilink
    English
    arrow-up
    12
    ·
    edit-2
    1 year ago
    1. Are you absolutely sure that your RAM is installed according to the motherboard’s instructions?

    2. Have you tried swapping the two RAM modules between the slots that they are in?

    3. Have you tried using both RAM modules independently from each other?

    Edit:

    1. Do both of the modules have the same specifications? Unlikely that this will cause issues (I think, I haven’t tried it but, y’know, in theory) but it may.
  • frog 🐸@beehaw.org
    link
    fedilink
    English
    arrow-up
    11
    ·
    1 year ago

    Okay, I’m back and I have slept. Have a look at your CPU. I’m 90% sure that’s where the problem was when I had this issue. I think in my case, one of the pins was slightly bent, and once it was very carefully straightened, the problem went away. But it could also be just not seated properly, or is overheating, or has dust on it.

      • frog 🐸@beehaw.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I saw in another post that you borrowed your partner’s RAM. Is it possible for you to borrow their CPU (assuming it’s compatible with your mobo)? If all the RAM is usable when you’re using their CPU, that would point to your CPU having an issue, as there is the potential for a failure there that’s not visible to the naked eye. If the problem still happens with your partner’s CPU, then at least you’ve eliminated one possibility, which is useful for diagnostic purposes.

        • Vestria@beehaw.org
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          I’m inclined to agree that the CPU might have been set incorrectly / have a bad pin, especially after the black screen and BIOS errors after updating.

          Unfortunate, but it happens to the best of us.

  • dan@lemm.ee
    link
    fedilink
    English
    arrow-up
    10
    ·
    edit-2
    1 year ago

    msconfig has a maximum memory option. Worth checking that to make sure it’s not set to 8gb.

    Could also be that you’ve installed the sticks in a weird configuration. Often if you have 4 slots the board actually wants you to populate slots 2 and 4 if you’re only using 2 sticks. Details are usually printed on the board.

    Or could be reserve for the iGPU, have a look in the bios.

    • nyan@lemmy.cafe
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      What’s weird about it? CPU seated wrong means that some pins may not be making proper electrical contact inside the socket. Pins not making proper contact means that they can’t energize the electrical traces that connect to those pins, or only do so intermittently, so whatever part of your system they control won’t work right either.

  • dredfox@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    I once had a TV tuner card use up 4GB of address space taking me from 8GB down to 4GB. Do you have any add-in cards that can be removed for testing? Or maybe any unnecessary onboard devices that can be disabled in the BIOS/firmware.

  • NewtAmbrose@beehaw.orgOP
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    Update: I installed Linux and it’s still not working I will tweak around with some of the settings yall suggested and get back to you ASAP. Also

    No igpu Gpu: 1070ti ftw2 Ram: corsair vengeance pro ddr4 3600 I’ll get my mobo soon im stepping out for groceries

  • doostein@beehaw.org
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    I had this issue once on a PC a few years ago. I ended up having to slightly over volt the RAM in the bios. After doing that I no longer had any issues. By slightly I mean I upped it by the smallest increment once or twice.

  • EvilColeslaw@beehaw.org
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    1 year ago

    When did the issue start? Did you install new RAM? Are both the new sticks identical or of mixed make? A new CPU? Did you unseat and reseat the CPU or anything before this started?

    You tried different RAM? Was it properly addressed or no? Did you try the current or different RAM stick by stick to verify each one is working on its own and then in the recommended slots as per your motherboard manual?

    These steps/questions are necessary to determine whether the issue is a bad memory stick, something funky going on with the memory controller wrt slots, timings, combination of different modules, etc, or even the possibility of a defective memory controller or a bent/broken pin on the CPU.

    • NewtAmbrose@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Randomly one day I was playing a game and it started stuttering so it worked at one point. Got ram installed into the right slots. Tried a different set, then my old ram stick then tried with new ram and old ram. At that point it states 24gb available 7.9gb usable.

  • NewtAmbrose@beehaw.orgOP
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Update: I stole my partners ram and put 4 x 8gb in there and now it’s showing 16 GB available. Smh. So it seems something is reserving half of my ram. I reset bios to default. PLZ help lmaooooooooo

    • knokelmaat@beehaw.org
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      What happens if you put in 2 x 8gb? Play around a bit with where you put them. Just to be sure if it is half of your physical ram slots that don’t work or if the slots themselves are fine and the issue is further down the line.

  • Takatakatakatakatak@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Only time I’ve ever had this happen, I had inadvertently over tightened my CPU cooler. Scythne ninja 2 was a godsend for small form factor builds, but damn it was easy to over tighten!

  • NaoPb@beehaw.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I’ve had this happen on a system where it was either the chipset or the cpu that was unable to allocate more ram.

    However that was an older system and I’m infamiliar with ryzen processors on this issue.

  • Katzastrophe@feddit.de
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Unlikely, but your motherboard might have an extremely low max RAM capacity.

    Search for your boards specifications and check how much RAM/Memory it can suppport. If you don’t know your motherboards name, open CMD and type: “wmic baseboard get product”

    • SaltySalamander@kbin.social
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      The amount of RAM your system can support is determined by your processor, not your motherboard, and it’s been this way ever since the memory controller was moved from the motherboard’s northbridge to the processor over a decade ago.

      • Katzastrophe@feddit.de
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        C’mon, the poor guy can’t get more than 8GB, at that point I’d say it’s a possibility that his motherboard is simply that old.

  • NewtAmbrose@beehaw.orgOP
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Hey all still working on it I’ll try a few more fixes today. Thank you guys so much for all the help 😭